Upcoming EFILive training in 2016

zfuller123

zfuller123

StarLite Diesel
Sep 2, 2006
429
0
16
Utah
www.starlitediesel.com
Hello again everyone! It's that time of year for us to start putting together our EFILive training classes and schedule.

This past year we have been much busier than previous years so there were only 4 class offerings early in 2015 (winter/spring time). 2016 will be much the same, with only 3-4 classes total planned as of right now.

There is ONE confirmed class at this point available for signup that will be held in Ft. Worth Texas at Dynocom. If you're interested in the class get your spot now! The class is limited to 20 participants. The Texas class already has several seats sold since we posted the class 2 weeks ago on our FaceBook page. HERE[/URL]is the link to sign up on our site for the class. There will also be discounts offered to those who attend the classes on both products and services offered by StarLite Diesel.

We will update this thread as we confirm and lock down the dates/locations of the remaining classes to be held next year. The locations currently on the agenda are Ohio, Utah and Minnesota - but these are subject to change.

If you have questions, please email us! [email protected]"][email protected][/EMAIL"][email protected][/EMAIL"][email protected]"][email protected][/EMAIL]

Please note these classes are intended to teach you how to use the currently available software, include lunch, drinks, etc. and together as a class we build tunes for trucks that are then placed on the dyno to demonstrate the use of the software as well as diesel theory / practices when approaching ANY year truck. These classes simply cannot cover in 2 days all supported years/makes of truck. Another note, these classes do NOT cover emissions removal for all the obvious reasons.
 
zfuller123

zfuller123

StarLite Diesel
Sep 2, 2006
429
0
16
Utah
www.starlitediesel.com
Not sure if we will be or not this year... We might do one in the fall, but winter / spring time is pretty booked up right now and we're adding a new small office space in Salt Lake to expand operations further so with all the growth we're experiencing and the simple fact of I don't want to work 7 days a week all year this year, it'll likely be Fall before we have a class here. Thanks for letting us know there still some interest here though! Had kinda given up and figured everyone around the area wasn't interested anymore since we've held so many here.
 
zfuller123

zfuller123

StarLite Diesel
Sep 2, 2006
429
0
16
Utah
www.starlitediesel.com
No plans on coming back that way either unless it's late this year, aside from possibly attending an event or 2. There might be a summer class somewhere back east and then 1 or 2 in fall, but right now this Ultimate Callout challenge and all the changes happening here with new projects and products we're trying to get ready for release - there isn't time for the classes too in the early part of the year.
 
zfuller123

zfuller123

StarLite Diesel
Sep 2, 2006
429
0
16
Utah
www.starlitediesel.com
Nothing planned at the moment.... we might put something together for fall, but right now - whole season of motor sports on our doorstep to get through - can't do classes in the summer and get all the work done too...
 
blownblue

blownblue

New member
Oct 22, 2008
61
0
0
Acme, WA
Definitly would be interested in the fall if you do one in Utah or the nw.. I will have to keep an eye open for this.
 
K

KrazyOnHighways

New member
Jul 15, 2016
1
0
0
Is it gonna be up to date tuning? What I mean is it gonna be about LML , CM2200 and CM2300 Engines or all the older models?
 
Woodster

Woodster

Computer Nerd
Aug 28, 2009
176
0
16
Utah
Let me know if you have another Utah class Zach.

Also, PM me some pricing on your DSP 5 tuning please.
 
zfuller123

zfuller123

StarLite Diesel
Sep 2, 2006
429
0
16
Utah
www.starlitediesel.com
2016 EFILive Training classes continued....

Hello again everyone! We're well past the halfway point of the year and we have managed to arrange a couple more classes in the coming months before 2016 draws to an end.

Currently we have 2 new classes to announce coming up this Fall.

The first class will be held at UNOH in Lima Ohio - a frequent stop for us in our training classes. This class will be held October 8-9th - details can be found on our website.
The second class will be held at my personal shop in Grantsville, Utah on November 12-13th - again details can be found on our website at the link below.

If you're interested in the class get your spot now! Each class is limited to 20 participants. The Ohio class has been on our website and FaceBook for a week and already has several seats sold. The Utah class, surprisingly has even more spots taken. For more information or to sign up, click HERE.

These classes begin from the very basics of tuning and move quickly into building tunes for simpler trucks so that theories can be demonstrated both in the software and on the dyno. Saturday's class will be all about the tuning. Sundays class will be about demonstration and answering as many questions as possible by the end of that day. The core content of the class will be very similar to what it has been in all of the past classes, however the structure of the class for Sunday will be different than it has in that I want to give as much opportunity for questions to be asked as possible. Please read the "fine print" below before signing up!

There will also be discounts offered to those who attend the classes on both products and services offered by StarLite Diesel.

If you have questions, please email us! [email protected]
We look forward to seeing you there!

Please note these classes are intended to teach you how to use the currently available software, they will include lunch, drinks, etc. In these classes we will together build tunes for trucks that are then placed on the dyno to demonstrate the use of the software as well as diesel theory / practices when approaching ANY year common rail truck. These classes simply cannot cover in 2 days all supported years/makes of truck. Another note, these classes do NOT cover emissions removal for all the obvious reasons, so PLEASE do not sign up if that is your only reason for attending. We will be using EFILive Software alone - no hex editors, other tuning software, etc. will be covered in this class
 
zfuller123

zfuller123

StarLite Diesel
Sep 2, 2006
429
0
16
Utah
www.starlitediesel.com
KrazyOnHighways said:
Is it gonna be up to date tuning? What I mean is it gonna be about LML , CM2200 and CM2300 Engines or all the older models?
Click to expand...

It will be one day of what I call "the basics" and yes, that will be taught on the older trucks because it's easier to demonstrate things such as timing on 1 or 2 timing tables instead of 6-12 timing tables. Sundays class will be mostly open for questions after we dyno a couple of trucks we build tunes for and go over data logging. There will be NO emissions removal tuning covered on any year/make of truck. There never has been in any of our classes, just so you have that in mind.
 
You must log in or register to reply here.
Top Bottom