Uca replacement

S

strummer

Member
Oct 22, 2015
43
2
8
48
I'm needing to replace my ball joints on my 05 4x4 . Question I have all the replacement parts I'm finding does not show for a 4x4 . Are the uca the same for a 2x4 and a 4x4 ? Should I replace the uca or just the ball joint ? Truck has 240k miles on it . Also how do I tell if my pitman arm and idler are are 3 spline or 4 spline with out removing them? Thanks
 
andy-stevenson

andy-stevenson

New member
Jul 7, 2013
838
0
0
I'd replace the whole arm. There's not much of a difference in price for a ball joint or the complete arm with the joint already installed.

You should be able to slide the sleeve up on the arm back into the steering box and count the number of splines. I think you can also give your VIN to the dealership and they can look it up?
 
c20elephant

c20elephant

C20ELEPHANT
Apr 25, 2013
2,065
0
0
Phoenix, Arizona
I would check the Raybestos Professional line of parts for the UCA's and lower ball joints.

Raybestos 502-1083 Professional Grade Control Arm and Ball Joint Assembly

Lower ball joint Raybestos 505-1363 Professional Grade Suspension Ball Joint

Upper ball joint Raybestos 500-1104 Professional Grade Suspension Ball Joint

https://www.youtube.com/watch?v=FK4PxADJXzw
 
Last edited:
S

strummer

Member
Oct 22, 2015
43
2
8
48
Just got off the phone with 2 parts houses . The 2x4 and 4x4 have the same part number . So there are the same . Thanks for the help guys


Sent from my iPhone using Tapatalk
 
S

strummer

Member
Oct 22, 2015
43
2
8
48
Went to the dealership a few days ago . Had them look my truck up by the vin my idler arm and pitman arms are the 3 spline . Thanks for the help
 
C.bowles2

C.bowles2

2005 lly duramax
Nov 16, 2013
489
0
16
Ohio
Yea the upper control arm bolts are known to break. If they do napa sells a whole replacement bolt kit. I went with moog upper control arm and ball joint. Holding up so far




Sent from my iPhone using Tapatalk
 
c20elephant

c20elephant

C20ELEPHANT
Apr 25, 2013
2,065
0
0
Phoenix, Arizona
From another site on the Moog control arms...

Replaced the upper control arms with Moogs on my '04 3500. They seemed pretty cheaply made. The originals were fully boxed, the moogs just has the end's boxed and the middle just has the edge flared out. didn't come across to me as a 'this part is made to last' kind of thing.
Click to expand...
 
turbostang7

turbostang7

New member
Apr 11, 2011
239
0
0
Rexburg Id.
My moog parts that I changed looked the same as what I pulled off, doesn't mean it wasn't changed in the past. They seem to hold up just fine with a lift and 35" tires.
 
SoCalMike

SoCalMike

Member
Dec 12, 2010
760
18
18
SoCal
Do not use ac delco uca. The ball joints are crap. At full drop out it will bind in the ball joint and not rest on the frame stop.

Raybestos uca look the same as acdelco also........
 
C.bowles2

C.bowles2

2005 lly duramax
Nov 16, 2013
489
0
16
Ohio
Moog makes a couple different options. One better than the other like a premium line




Sent from my iPhone using Tapatalk
 
S

strummer

Member
Oct 22, 2015
43
2
8
48
The ones I bought were the moog premium ones . Still have to buy an idler arm and bracket . Got my uca,tie rod ends and pitman arm and new steering stabilizer
 
You must log in or register to reply here.
Top Bottom