So I threw a CEL on my 05 lly and pulled up 5 codes. 3 of the 5 said turbo vane position sensor 1 said o2 sensor and the other said low voltage in circuit. Im new to diesel engines so all help is appreciated
Turbo vane position sensor
- Thread starter M.hulsey91
- Start date
P2564 p2563 p0046 and p2228 and p0652 are all 5 codes that were read before it went into limp mode
I've talked to several different places and is all leaning towards the turbo vane position sensor being bad. If not that then the ecu may have went to crap but i have the factory one still so there's a plus. Just aggravated that i can't drive it right now
Vane position failure code is a p0003a.. Had that code pop up on me... When I see the 2563 code pop up on trucks usually the turbo vanes are getting stuck either intermittently or all the time.. Is this the first time this happened to the truck?
The sensor isnt covered by the warranty which sucks. Im gonna have the turbo checked tho because it is covered by the warranty
If it is the sensor by chance I found them somewhere much cheaper than the stealer.. About $700 cheaper.
I'm selling a lmm turbo with a good used vane position sensor for $200
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
The dealer here wants $400 for sensor. Im prolly taking it to a shop monday and gonna have them do it. Idk waiting for dealer to call back
I know the vps will. But the turbo might need some tuning. And North Dakota
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
If you hook up a tech 2 or V2 you can look at desired vs. actual vane position thats an easy way to tell if something is wrong.
I sell new sensors for $350 shipped if you need one.
Yellowchevy
I sell new sensors for $350 shipped if you need one.
Yellowchevy