Back in the final days of my 01, I had an oil pressure incident. I was stuck in 5hrs of traffic with a bad injector and pressure ran next to nothing. That weekend I replaced two injectors, but truck always blew black smoke after. Both (S400 & A3000) have about the same amount of play. about 1/16" up and down and in and out. The S400 is only loaded with soot in and out on exh. The A3000 has more soot, and gummed up on pressure side. I'm guessing this ones the smoker.
Now, I'm considering having both re-done, where's a good source to have them done? would rather not deal with ATS. or would I be better off rebuilding the S400 and replacing the A3000 with a S366? It had plenty of power when it had no issues.
Now, I'm considering having both re-done, where's a good source to have them done? would rather not deal with ATS. or would I be better off rebuilding the S400 and replacing the A3000 with a S366? It had plenty of power when it had no issues.
