LB7: Truck is cursed!

[dirtydmax]

Finally found my oil leak and turned out to be a cracked #5 so I swapped it out and the truck had the best run of its life for about 5 min then it started feeling funny like little sputters then I lost 3 cyl.codes 0202.0208 and 1262 popped up and it's pretty much unrivaled as usual,has anyone had this issue before and where should I look?Very weird to lose #2,8 and 3 at once .Thanks in advance....as usual.

 

[Burn Down]

Keep your head up man... If it were easy or cheap it wouldn't be a D-max

 

[dirtydmax]

Just getting tired is all but the truck made some good powa so il keep pluggin,thanks for the kind wordsswapped the **** with no luck.

 

[dirtydmax]

That was ficm BTW!

 

[dirtydmax]

Nobody?I'm thinking it's injector related but how do I figure out wich one?

 

[S Phinney]

Nobody?I'm thinking it's injector related but how do I figure out wich one?

These are not fresh injectors? I would start by sending them out for testing.

Sent from my SM-G920V using Tapatalk

 

[dirtydmax]

These are new bosch but still could have a dud.less than 10 kms on them but thinking a chafed injector harness on pass side since the covers have been off 20+ times.

 

[dirtydmax]

This truck put some decent power out for the first time just before the codes set.new Stix went in after granading the pump.

 

[MAXX IT OUT]

Will all my experience with those dam codes, I have had it happen to me twice, it's always been a hard parts probably under the valve covers. Here are my hair pulling moments.
http://www.duramaxdiesels.com/forum/showthread.php?t=48591

 

[dirtydmax]

Oh ya I hear you! Read your posts 3 three times trying to brainstorm.I think you nailed it with it being under the covers.Well back in I go.

 

[Lparrill]

Saw your post in another thread. What was the problem?

 

[Awenta]

Saw your post in another thread. What was the problem?

X2 i was going to ask there if you fixed it and what the problem was.

Sent from my SM-N910V using Tapatalk

 

[dirtydmax]

Saw your post in another thread. What was the problem?

Chafed #3 injector harness..twice on the same spot back to back with 2 harneses so made it difficult to pinpoint.il post a video of this thing getting it on.unbelievable, Mark did say this truck will love RPM and was bang on.

 

[andy-stevenson]

Sub'd for videos!

 

[Burn Down]

Chafed #3 injector harness..twice on the same spot back to back with 2 harneses so made it difficult to pinpoint.il post a video of this thing getting it on.unbelievable, Mark did say this truck will love RPM and was bang on.

Good deal:thumb:

 

[Chevy1925]

least it was just electrical. those gremlins can be a bitch to find

 

[dirtydmax]

Yesir they can.can r n r the valve covers in record time now though