Trans bolt size

[sweetdiesel]

Anyone know the thread pitch and diameter of the bolts that we use for mounting the allison bell housing to the rear plate?

12x1.5?


Thanks Simon

 

[duratothemax]

m10x1.5

unless you'd rather hear the answer from someone else?

 

[schulte]

unless you'd rather hear the answer from someone else?

It's m10x1.5.

 

[schulte]

Part number 15724226.

 

[sweetdiesel]

m10x1.5

unless you'd rather hear the answer from someone else?

Thanks Sheldon

It's m10x1.5.

thanks

 

[sweetdiesel]

Anyone know where to find a M10x1.5 x 80 stud

I am using bolts right now but would like to get some studs prefer a high grade also

 

[Noreaster]

try either grainger or fastenal

 

[Burn Down]

http://www.te-co.com/Metric+Studs-C-PG1026-C-.aspx
Cat may have some as well, I will look when I get to work.

 

[sweetdiesel]

Thanks Albert

http://www.te-co.com/Default.aspx?CategoryID=PG1026&ItemID=60403

 

[LBZ]

Did you try D n D Bolt or the bolt supply house Slim? If they don't have then CAT or CASE might but they may be hard to source without a piece of equipment to go by. I will ask Brad or Mike at Future Ag and see if they can help find something.
Posted via Mobile Device

 

[schulte]

Anyone know where to find a M10x1.5 x 80 stud

I am using bolts right now but would like to get some studs prefer a high grade also

Have you had issues with breaking/streching factory studs?

 

[sweetdiesel]

Did you try D n D Bolt or the bolt supply house Slim? If they don't have then CAT or CASE might but they may be hard to source without a piece of equipment to go by. I will ask Brad or Mike at Future Ag and see if they can help find something.
Posted via Mobile Device

Ya i tried both places... All they have is ready rod and thats to low grade IMO

Have you had issues with breaking/streching factory studs?

Factory bolts are not long enough for the Lenco/Bruno

Im using grade 10.9 bolts right now, But would prefer studs for install

Also there is only 5 bolts holding the trans in, Due to the SB Chevy bell house