Traction Bars, ready to buy. What y'all runnin?

[Dirtymaxx03]

Im in the market for some traction bars, theirs so many options i just wanted to see what y'all are runnin. If any vendors see this feel free to PM me a quote. Im ready to buy!

 

[smarquis]

I got the Cognito Economy bars, and I think they work great. Guys at the shop wanted me to buy the heavier duty versions, but Nick at NorCal told me the economy would be fine. So far, Nick was right.

 

[Dirtymaxx03]

i just bought the same ones.

 

[c2500dmax]

you can make your on much cheaper

 

[Dirtymaxx03]

i priced out a set.....a beefy set. and they were not cheaper by any means.

 

[c2500dmax]

i have a set of 3inch bars i've got 40 bucks in but i got the tubing for free:thumb:

 

[Dirtymaxx03]

where did you buy the end pieces? and free tubing helps alot.

 

[c2500dmax]

FK rod ends.com has some nice bar ends....but i used top links from tractor supply cut them in half weld them to your tubing and you have a set of fully adjustable trac bars

 

[Dirtymaxx03]

yeah i have a buddy who took a route similiar to that. he launched his 683 hp cummins a few times and not the bars are bent..........

 

[FrankenMax]

I built my own with hyme joint's and 3/4 hardware with 10FT of DOM for right around $230.:thumb:

 

[paint94979]

Caltrac's are what im running

 

[MD-Dmax]

i have a set to get rid of since i went with caltracs

 

[duramaxxin73]

three link set up is what I'm running on my puller.

 

[Akdiesel]

Wanting to get rid of my loud ass Caltracs and go with a solid set of traction bars

 

[Will]

Wanting to get rid of my loud ass Caltracs and go with a solid set of traction bars

To bad your far away. I have a set from Tony B. I'm wanting to get rid of.

 

[maxthis]

I have the cognito economy bars on my truck, bought them on craigslist for 150 bucks...practically brand new all i had to do was make my own frame mounts which i like mine better then cognito's anyway.:thumb:

 

[68skylark455]

Fabtech solids and they look good as well:thumb: