hey guys wondering what they called the fitting used to check vacuum or pressure for those with lift pump. the one with the black plastic cap near the front of the engine. i am looking to buy a snap on gauge with a "compucheck" fitting. it is a quick connect fitting like the dmax has but they don't specify and i cant quite see clear enough if it will fit. thanks guys
test port
- Thread starter stacks04
- Start date
GMC_2002_Dmax
The Still Master
yeah i knew that. if that is my only option i will go with it. but if my dealer can get it makes it much easier to warranty and all that jaz. it will be used alot and the kent moore one just doesn't work right anymore. you know the saying want it done right do it yourself. same applys to tools. it you want it to work right buy it yourself.
but thanks tony.
off topic did anyone go to the pulls at the goshen fairgrounds?
but thanks tony.
off topic did anyone go to the pulls at the goshen fairgrounds?
Arcing
<--Moms Josephs Coat Rose
Kent-Moore
Kent-Moore Vacuum gauge
kent moore j-44638
I like the bleeder setup, this is the way the fuel system/filter should be bled and tested.
Kennedy's costs less and is easier to get...
Kent-Moore Vacuum gauge
kent moore j-44638
I like the bleeder setup, this is the way the fuel system/filter should be bled and tested.
Kennedy's costs less and is easier to get...
Last edited:
i just want to know what the quick connect fitting is called. i think it is a compucheck fitting but want to be sure.
Arcing
<--Moms Josephs Coat Rose
Heres my gauge!
Got it from my snap-on guy, but its from Star tools instead of Kent Moore
Works great
Got it from my snap-on guy, but its from Star tools instead of Kent Moore
Works great
Last edited:
Simon is a little Dyslexic sometimes Mike
What did Snap-On charge you for that set-up? The KD is $150 I think.
That seems close, i wanted it and it was cheaper than the kent-moore one
so i didnt care! Quality of it is still exelent fore less $$$
Oh and the actual gauge is Ashcroft... Exelent gauges!!