Temps pulling

[Twan]

I have a 2008 duramax, 182,000 miles. All stock power with all the EPA stuff still on and working. I have a egt, oil temp gauge and edge insight.
My question is does anyone have gauges on a stock truck and what are you seeing for oil and egts?? Mine runs hotter than I would like to see them run. I've owned the truck sense new, less that 5 miles on it and it has ran the same, mileage is the same. The motor area is clean, no sign of leaks.

 

[countrycorey]

With an just an intake and exhaust (DP Back), and an EGR plate I was seeing EGTs around 1000-1300 towing my dad's 38' 5th wheel between 70 and 80 mph. I averaged around 1000 to 1100 and would occassionally spike to 1300. Do not know about oil temps as I do not have a gauge for that yet.

 

[THEFERMANATOR]

I think most are seeing in the 250 or so range for oil temps towing, but some have seen a good bit higher. As for EGT's, on a stock truck 1300-1400 would be easily reacheable.

 

[Twan]

My oil holds 240-270 pulling, and 220-240 empty, egts run 1200-1500 pulling.
Thanks for the honest replays.

 

[Chevy1925]

what are your outside air temps?

 

[derek06]

I'm so glad I don't have a egt gauge :roflmao:

 

[Twan]

50-105 don't seem to change the temps. Hoping the winter weather will lower them some.