Tech said can't run slicks.

[1TRIKHD]

So I get up to tech with my slicks on, and he says he can't see how far my lugnuts are threaded onto the wheel studs since I have aftermarket lugnuts for the raceline renegades. So I go back and put my stock lugnuts on, but my socket is to fat to fit in the hole of the wheel. Thoughts? Advice? Thanks for the help.

So i put the pyos back on and gonna run them now.

 

[darkness]

A non-impact socket might fit. The chrome ones. They aren’t as thick. And yes, the stud is supposed to stick out past the end of the lug nut the same distance as the diameter of the stud.

 

[down_hiller]

This is what I use
https://www.toolsid.com/performance...dllKwdVNrbvIVd8zdmI36x4p9y9QKg_RoCHO8QAvD_BwE
I bought mine at napa. The white sleeve slides off the socket to so they can be even thinner

 

[1TRIKHD]

Well I got to make a pass on the pyos and 265s after waiting 2hrs in the stagginging lanes. Lots of people out today. Was racing my buddy in his Cummins and wasnt paying close enough attention to my boost guage.
Nothing to write home about but this is what i did.

With Blake's tunes I very happy how it performed, and its definitely has a 11 second pass in it. Thanks for the info guys. Next time out I'll get that 11 sec pass!

 

[TheBac]

Work on your 60' and you'll be fine.


Howd you end up setting up your caltracs?

 

[gmduramax]

Stock CP3? It’s got 11’s for sure.

 

[OregonDMAX]

This is what I use
https://www.toolsid.com/performance...dllKwdVNrbvIVd8zdmI36x4p9y9QKg_RoCHO8QAvD_BwE
I bought mine at napa. The white sleeve slides off the socket to so they can be even thinner

I have a couple of these and they sure as hell were worth every penny

 

[1TRIKHD]

Work on your 60' and you'll be fine.


Howd you end up setting up your caltracs?

Still runiing my long bars havent got the caltracs yet Tom.

 

[1TRIKHD]

Stock CP3? It’s got 11’s for sure.

Stock sticks and CP3.

 

[1TRIKHD]

I have a couple of these and they sure as hell were worth every penny

Yeah I'm gonna get me one for sure.

 

[Burn Down]

That’s a good knock the dust off run:thumb:

 

[1TRIKHD]

That’s a good knock the dust off run:thumb:

Thanks brother, I'm better then this, it was just one of those things that happens with the NFG done times. Lol

 

[duramaxnate]

I'd almost bet if you changed your G to an R you'd hit an 11.

Sorry, 11.999999999999999999999:roflmao::roflmao:

 

[Ne-max]

Still runiing my long bars havent got the caltracs yet Tom.

Save your money. :hug:

 

[NC-smokinlmm]

Nice run...:hug:

 

[1TRIKHD]

Nice run...:hug:

Thanks man.

 

[1TRIKHD]

I'd almost bet if you changed your G to an R you'd hit an 11.

Sorry, 11.999999999999999999999:roflmao::roflmao:

I am going to switch out converters soon with a K.

 

[duramaxnate]

I am going to switch out converters soon with a K.

Even better..

Sent from my Note 9

 

[1TRIKHD]

Ordered up some narrower openeded lugnuts for the race setup. Had someone contact me about my long bars that were currently on my truck, so I sold them to him and got some Caltracs to replace the long bars.

I also had some u bolts made from a spring shop for $60 on Thursday after work, for when I put the rear brackets on. Should hopefully have them on this weekend if I get time. If not the next.

 

[Josh154]

When’s the next track day?