T4 pedestal measurments.

[Redbowties88]

Hey, if anyone has a pedestal lying around could you possibly give me some measurments? I need to know from the up pipe side horizantally the distance to the turbo side (to the center preferably) and also the height from the center from the back side to the top.


Thanks

 

[Dirtymaxx03]

i can get you the measurments tuesday if my turbo and pedestal show up when they are supposed too.

 

[Redbowties88]

Thanks man that would be a help. I have access to a cnc so the flanges should be no prob but the piping between them may be a bitch

 

[paint94979]

Thanks man that would be a help. I have access to a cnc so the flanges should be no prob but the piping between them may be a bitch

I bought a PPE Pedestal with spacer for 400$ from Dan... you could run into plenty of fitment issues by making your own

 

[TeaBagger2006]

Fabbing up a pedistal seems like a major headache, To me atleast. But if you have the skillz go for it

 

[Redbowties88]

I bought a PPE Pedestal with spacer for 400$ from Dan... you could run into plenty of fitment issues by making your own

i could, however i want to have a wastegated pedestal and those aren't cheap... also no one i know of makes one that fits correctly for the turbo i have in mind. Not saying i wont break down eventually and buy one and modify it....just trying to keep my options open

Fabbing up a pedistal seems like a major headache, To me atleast. But if you have the skillz go for it

well the flanges and support will be no biggie because i can just CNC them... its getting the pipes that will be a PITA... mostly the going from round pipe to the rectangle has me the most worried

 

[1lowdiesel]

What size are the pipes usually. I'm thinking 1.5" but without seeing one in person it's just a guess.

I gave access to a mill and can make the flanges but I'd like to know what size piping to buy.

Making a jig off my stocker and welding it all up is cake.

 

[770JOHNNYW]

i think rick uses schdule 40 tubing for his pipes in the ped...makes for a pretty beefy piece.

 

[1lowdiesel]

Yea I figured it wasn't just regular tubing. Thanks.

 

[Redbowties88]

i wonder if you could fit 2'' if that would help or hurt...hmmm, if you had bigger up pipes that is..

 

[delong_1]

i have a couple cast peds, i could send you either one so you could have exact measurements.

 

[RickDLance]

2" od .120 wall 304 stainless is what I'm using on the normal sets. It is the equivalent of schedule 10.

The big boys toys are 2 1/4" x .120. Hope this helps.

 

[1lowdiesel]

Thanks rick that helps a bunch.