switchable tunning
- Thread starter LBZrcks
- Start date
Looks good. I'm glad I didn't install mine yet because I will copy yours. What did you use on the bottom to mount the switch?
It is a PITA to mount it here, its not like you just drill a hole. I had to cut the bottom of my ash tray insert off and shorten it (make it shallower). Then re epoxy it back together. Then I had to drili the hole, drill a hole in the top of the ash tray insert to be able to get to the knob screw to tighten it to the post. Then drill a hole in the back of the ashtray mount, and another one in the back of the dash behind the ashtray. Yes a lot of holes and they need to line up, and theres not much room to drill anywhere down there.
Thanks. It looks like it was worth the work. Nice to have the switch out of the way so no one screws with it.
Ross is/was planning to release it this weekend, but it looks like we are running out of time - it's 9am Sunday here. I'd suggest that it will be posted sometime tomorrow, so it may just make it in for the back end of your weekend.
The LBZ DSP software installation will require the new pre-release software/firmware Paul released a day or 2 ago to work, so you can at least make a start on that process now.
Release will only be for LBZ.
Cheers
Cindy
The LBZ DSP software installation will require the new pre-release software/firmware Paul released a day or 2 ago to work, so you can at least make a start on that process now.
Release will only be for LBZ.
Cheers
Cindy
What version software do we need to run dsp on the lbz?? I don't have the option for dsp under upgrade OS??
You need to be running at least our Oct 2 2009 release - V7.5.6.99 S&T, V8.1.2.75 BBL, V2.06.16 Firmware http://forum.efilive.com/showthread.php?t=12014
NOTE: This is not our latest software release, our latest release is Dec 20 2009 - V7.5.6.101 S&T, V8.1.2.81 BBL, V2.06.21 Firmware. http://forum.efilive.com/showthread.php?t=12587
If you need to upgrade your software, upgrage to the latest - the LBZ DSP files are apart of the latest download, whereas initially they were a zip file that needed to be downloaded and installed.
ALSO - the Dec 20 release is still classified as a pre-release, as such you'll have to manually download the files - they won't be in an auto update format until they are deemed public release.
Cheers
Cindy
NOTE: This is not our latest software release, our latest release is Dec 20 2009 - V7.5.6.101 S&T, V8.1.2.81 BBL, V2.06.21 Firmware. http://forum.efilive.com/showthread.php?t=12587
If you need to upgrade your software, upgrage to the latest - the LBZ DSP files are apart of the latest download, whereas initially they were a zip file that needed to be downloaded and installed.
ALSO - the Dec 20 release is still classified as a pre-release, as such you'll have to manually download the files - they won't be in an auto update format until they are deemed public release.
Cheers
Cindy