Stroker cp3

[malibu795]

Why would anything else matter but REAL WORLD TESTING! I could give a damn about anyting on a bench! I come to this site BECAUSE they doit! not talk about it. That to me matters. All the book work, bench work means nothing untill it is proven in a real world enviorment with everything else in the system taking it's roll. Jeff

X2 jeff..


DYNO/bench testing doesnt giviv real workd results...


wade if your so sure the WD pump is less then the II pump get is proven.... how many "test stands you know of???

better yet... get the truck of your running do bakc to back passes with them

 

[JOHNBOY]

I had a II stage two pump. Reworld test show it emptied my walet great. Did it flow more fuel than my stocker? Nothing to right home about. It would not really support an larger pusle than my stocker would. 50us whoppty ding. I took it off when I built my motor. The guts are the extact same as my stocker. Other than some extra paint in the bolt head it was no different then my stocker other than my walet was lighter.:rofl:

The 100% truth.

 

[IOWA LLY]

I had a II stage two pump. Reworld test show it emptied my walet great. Did it flow more fuel than my stocker? Nothing to right home about. It would not really support an larger pusle than my stocker would. 50us whoppty ding. I took it off when I built my motor. The guts are the extact same as my stocker. Other than some extra paint in the bolt head it was no different then my stocker other than my walet was lighter.:rofl:

The 100% truth.

Now this is good info!! Does anyone have similar data on the Wicked diesel CP3?

 

[Diesel power]

X2 jeff..


DYNO/bench testing doesnt giviv real workd results...


wade if your so sure the WD pump is less then the II pump get is proven.... how many "test stands you know of???

better yet... get the truck of your running do bakc to back passes with them

Personally i have yet to see any hp gains going from II's big cp3 vs the stroker pump, i dont think it will happen honestly, now im not talking about the stage 2 from II that was two years ago or so, but there new 85% pump!

since none of this testing is availible i asked for a simple answer to how and if shane, or pat have tested there pumps on a certified testing stand.....
and the answer was NO. so in reality if there are no dyno sheets or testing methods done to bosch standards the stoker pump has no proof in saying that there the best!!!!

but i agree that real world testing is the best way to measure performance, but my origonal quaestion was about there testing methods used on the stroker.........things that make you go hummmmmm

 

[Diesel power]

Now this is good info!! Does anyone have similar data on the Wicked diesel CP3?

X2 good info.

have you tryed the 85% from II?

 

[WICKED DIESELS]

85% of what...........Hmmm, I will bet it is a stroker as well.....where did they ever get that idea?

 

[JOHNBOY]

Personally i have yet to see any hp gains going from II's big cp3 vs the stroker pump, i dont think it will happen honestly, now im not talking about the stage 2 from II that was two years ago or so, but there new 85% pump!

since none of this testing is availible i asked for a simple answer to how and if shane, or pat have tested there pumps on a certified testing stand.....
and the answer was NO. so in reality if there are no dyno sheets or testing methods done to bosch standards the stoker pump has no proof in saying that there the best!!!!

but i agree that real world testing is the best way to measure performance, but my origonal quaestion was about there testing methods used on the stroker.........things that make you go hummmmmm

The stage II I was refering to is an old one. Hogue told me the new one is better. I have no need to try one now. I have 2 CP3s now,2 CP3s flow all the fuel I need

 

[malibu795]

a 3.4???????

 

[super diesel]

In light of the new info in here. This is interesting. Maybe post #14 hit home closer than I thought?

85% of what...........Hmmm, I will bet it is a stroker as well.....where did they ever get that idea?

Sucks when this happens (and worse if it's true) and this is the focus instead of the next needed mod down the line.

 

[McRat]

... off topic!

...off topic...

When you tested the Industrial Injestion Duramax CP3, how much did it flow at 4000 rpm?

 

[Diesel power]

Who the fk cares? Seriously. Go ahead and throw your friends under the bus, one by one, just leave us out of it.

Now...

When you tested the Industrial Injestion Duramax CP3, how much did it flow at 4000 rpm?

Call II and ask them......

 

[LBZrcks]

OK on the same token pats test is not a bosch test, and Bosch makes the darn things right? so why not use one of there(Bosch) testing methods and certified test stands, i have access to a few myself.
i mean i could draw a Dino graph that would blow your mind, but that dint mean it's 100% accurate......

So did yo get your free pump that you wanted for testing purposes, out of this thread?

Who cares if you have access to test stands or anything? Obviously they have not been tested the way you want, But they sure have to outperformed the others!

Here's an idea, go buy some cp3's at full price and test them yourself, since you don't like how they were tested and it apparently doesn't matter to you that they outperformed the others. Instead of trying to get some more free handouts.

 

[McRat]

Sorry folk, I let this thread get too far off topic. Superbowl and insults don't belong.

Anything that is not technical is going to be cleaned up. If you feel I have deleted a post of yours unfairly, please PM me.

 

[McRat]

I deleted all the insults and off-topic, since it became the majority of the thread. I did not delete any tech that I know of.

Back to the topic. The question is whether Industrial Injection's published test results are better than my published test results.

I bought one of each pump and tested them. My data indicated I should be running the WD pumps for their superior high RPM output, so I switched. If the II pumps would have tested higher, they would be on my truck. For those that know me, you know why I do these kind of tests.