LLY: stock turbo with batmo wheels

[Fasttoys450]

I am running one on a ported lb7 turbo with dual pumps and stock sticks did a lot of work stock pulling and it worked out awesome spools fast down low and pulls up top really well I pushed mine at 38 to 40 psi for a long time now I am back down around 35 37 I have a lot of people ask me if I would do it again and YES I WOULD and not to mention it sounds awesome hope this helps you out

 

[Dozerdog74]

I have one in a Danville 2.5" charger and really like it. Its.capable of some good power.
:thumb:

 

[not quick]

This was something I was thinking about when I do efi. I have a lly turbo laying around, and since you have to remove the turbo to change the wheel.....would I be better off getting a wheel for the lly instead since its bigger. Just thinking out loud, probably never happen really.

 

[Robby Avery]

Subd

 

[nmband13]

Ran a BMW stock turbo, stock housing 33psi never had an issue besides pegging the 1600 egt gauge at 50' running 60% sticks, dyno'd 548.7rwhp @28psi, so rough 560ish at 33psi


2001 LB7 ccsb - few mods 450rwhp+