stock LLY turbo dimensions. looking to upgrade on a budget.

[dmaxerLLY]

before i get blasted.. yes i tried searching with 0 results.
im a DIY guy i can mig, tig and fabricate everything neccessary myself.

ok im assuming T3 on the turbine inlet flange of the stock turbo?

i would love to stuff a s466-83/74 1.0ar in the lly with an adapter flange to T4 if its not already.


i dont see any benifit to buying a nearly 2000$ vvt upgrade when i can buy an off the shelf 650$ s366 and all neccesary parts for under 1000$

 

[1chevy02]

The stock turbo is a one piece unit you will need to put on a t4 or t3 pedestal to install a s466 or similar turbo.

 

[DMAXchris]

You'll need a T4 pedestal and you will need to fab an intake. There is no pedestal on the stocker. The exhaust housing is cast as one piece.

 

[dmaxerLLY]

forgot that the turbine housing is what the up-pipes bolt to. thanks guys