Steering Colum gauge mount?

[MOJO]

Steering Colum gauge mount?
Guys I am looking for a two gauge mount for the Colum is there such a thing?
I don't want A-Pillar gauges. Thanks J,C,

 

[07dirty]

i dont think there is a such thing. i have only seen the one...

 

[Mike L.]

www.the find.com

 

[BLKLMM]

are u spamming Mike

 

[Mike L.]

are u spamming Mike

Just trying to help. Those guys have a bunch of gauge mounts for the steering column.

 

[BLKLMM]

:rofl: I was playing:hug: Hit the link and got nothing

 

[MOJO]

Dead link I will try when I get home NAVY monitors us close.:thumb:

 

[John Wayne]

like this?

since its made for 01-03 trucks it definitely has to be modified to fit a 04-07 truck and it takes some time and patience.

There is not enough room for a second gauge(already tried that).

 

[MOJO]

Yes thats what I want but one on each side. You would think they would make one for these trucks.

 

[Mike L.]

www.thefind.com/cars/info-dual-steering-column-gauge-pod

 

[John Wayne]

Yes thats what I want but one on each side. You would think they would make one for these trucks.

They dont for some reason.

 

[MOJO]

I just went this rought; Edge Insight CS I am mounting it on the Colum with a Fab bracket. I will post a picture when done.

 

[5akman]

You might try a visual check with your eyes before deciding where to mount the gauges. Being 47 yrs old with bi focals, I can focus much easier going from glancing at A pillar gauges back to the roadway as opposed to looking down towards the top of my steering column and then back to the roadway. Just a thought...........

 

[SSchmi5519]

You can make one fit.

Best bet is to mold the 01-03 pod to your own. Get some thick gloves and a heat gun.

You will need one or two screws, 3M tape, or the like to secure the two shells together.

 

[JustinD]

I have the single pod for my column, I used a digital gauge that reads both boost and exhaust temp.

 

[JakeBrakeIH]

I too have the column pod in my half ton with a fuel pressure gauge. Very handy spot IMO for a gauge.

 

[MOJO]

5akman,

I am 46 yrs old with bi focals to; I was thinking the same this is all trial and error. I do some Fab work with Aluminum and S-steel we will see soon.:thumb: