Status calibration missing? What does this mean?

[DetailsUnlimited]

Trying to load my stock(EFI) tune back in my truck and this is what I get. Some how something stop the download of the tune now truck will not start? Suggestions??

 

[DetailsUnlimited]

Well there has to be an easier way of reverting back to the program you had installed other taking both batteries loose for 30 min's and then doing a full reflash? Is there somthing I'm missing like on the ppe tuners where you have a selection to put back to stock if the program hangs up?

 

[ripmf666]

Sounds like you need to do a full flash back to the stock tune.

 

[DetailsUnlimited]

I was trying to put back to stock when this happened. I had to do a full flash back to my tow tune.

 

[Trotorx2]

Did you get the tune from Dustin? Have you called him?

 

[DetailsUnlimited]

No, my racing tunes are from Dustin. I was going to the dealership and returning truck back to stock when this happened.

 

[JoshH]

Have you tried full flashing the stock tune? You shouldn't have to disconnect batteries to do it.

 

[DetailsUnlimited]

I got everthing working that night, it just took a couple hrs getting it done. So when Efi locks up you need to do a full flash back to stock correct?

 

[paint94979]

I got everthing working that night, it just took a couple hrs getting it done. So when Efi locks up you need to do a full flash back to stock correct?

full flash any tune

 

[DetailsUnlimited]

About full flash. It doesn't give me the option everytime?

 

[JoshH]

You have to hook up the black box to your computer before you open the tune. It should give you the full flash arrow if you do that.

 

[DetailsUnlimited]

thanks, will give this a try.