srw pulling with spacers

[06dmax]

HOw many people pull with 2inch spacers on there wheels and problems with it iv never been a fan didn't no how much stress it would put on the studs but I have them on currently to make the tires stick out even amount let me no of any problems and if I should take them off or leave them on thanks guy!

 

[Leadfoot]

I have 1.5" spacers and have pulled with no issues. A quality spacer should pose no issue if properly tightened and checked.

FYI, spacers are not IDEAL for pulling. The factory has a built in offset (roughly 3" narrower in rear), and running spacers makes the rears track the fronts which is not what you want to do for pulling.

I did it for asthetics and never had an issue when I pulled though. If your not worried about every inch then you will be fine.

 

[gundog]

I have been towing a 12,000 lbs for the past 3 years with two inch spacers. Never had an issue. But my spacers have their own separate lug bolts.

 

[06dmax]

Yes mine have there own lugs too so I guess ill give it a try with the spacers then

 

[05_LLY]

2"aluminum spacers on the back all last year:thumb:

 

[Briggs0130]

2"aluminum spacers on the back all last year:thumb:

^^^ And this guys puttin down some power :woott:

 

[Rhall]

Sled pulling or trailer pulling?

 

[05_LLY]

^^^ And this guys puttin down some power :woott:

More than some less then alotta others!

Sled pulling or trailer pulling?

Both Street use and sled for me, they are gone for this year though, figured my luck would run out sooner rather then later!

 

[06dmax]

yeah both sled and trailer for me hooked to the sled over the weekend so good so far