small lifts?

[adsit13]

how much was your lift?

 

[custom8726]

i do think my single piece may be a bit more solid,, but if i was to do it again I'd go 3 piece.

Plus you get a free skid plate with the 3 piece IIRC that was the deciding factor when I bought mine...

 

[770JOHNNYW]

so if i wanted to clear 33s with the stupid offset bmfs have and still drag race with 30x14 slicks what lift would work best are yall saying tuff country 4''?

 

[8100 Power]

so if i wanted to clear 33s with the stupid offset bmfs have and still drag race with 30x14 slicks what lift would work best are yall saying tuff country 4''?

What offset are you running?

 

[770JOHNNYW]

seems like its -24 or something 22x10.5

 

[bullfrogjohnson]

seems like its -24 or something 22x10.5

4" tough country is what I have on mine Jeremy

 

[-Shep-]

I like my TC 4" lift. I run mine with to where the CVs/tierods are level and I have the 4" blocks in the back. 325/60's on 18x12's with 4.5" backspacing clear with trimming the plastic part of the bumper.

 

[ChevyTruck]

i do think my single piece may be a bit more solid,, but if i was to do it again I'd go 3 piece.

Are you running a 6" kit decranked to a 4" lift kit?

 

[8100 Power]

I like my TC 4" lift. I run mine with to where the CVs/tierods are level and I have the 4" blocks in the back. 325/60's on 18x12's with 4.5" backspacing clear with trimming the plastic part of the bumper.

I thought you had to have 2" drops in the back to fit in up there??

 

[madmatt]

yep,, swapped out the rear 4" blocks for 2" and let the front down with the keys. my axles sit level when i have it set up to drive on the streets.

 

[-Shep-]

I thought you had to have 2" drops in the back to fit in up there??

...and maxed out torsion bars with green keys! :rofl:

 

[custom8726]

Are you running a 6" kit decranked to a 4" lift kit?

IIRC the lowest setting you can run a 6" TC lift is 4 3/4 were as a 4" lift at its lowest setting is 4" but can be cranked up to 6".....

 

[adsit13]

well TC offers a 4" & 6" lift..so if i can the 4" i wouldnt have to crack dowm..it looks like a real nice lift. think im getting the TC 4" with the 3 piece sub frame.

 

[Tank222]

Is it worth it to buy a coginito ntbd kit or the tuff country 4'' then buy the ntbd kit that ready lift sell's. I trying to run 35's with flat angles but it has to be ntbd.