Single stack

[TIM Z]

Jordan, i can get you a pic of the underside of my bed and how i ran my exhaust.

Your better off modifying your existing 4'' system.

Where do you want your stack placed?

I have a 5'' MBRP SS stack, i love it but i think 6'' would be sweet!

My stack sounds pretty quiet while normal driving/idleing, but barks like a Mother when i drop the hammer.

Definitley sounds better also than rear exit, can really hear the turbo/vanes !!

I used a piece of 4'' SS flex and 2- 4'' 90*'s up thru the bed.

 

[Whitetail Addict]

Wow, I have been trying to talk myself out of a single stack...this thread is making that more difficult.

 

[wikdlmm]

Jordan, i can get you a pic of the underside of my bed and how i ran my exhaust.

Your better off modifying your existing 4'' system.

Where do you want your stack placed?

I have a 5'' MBRP SS stack, i love it but i think 6'' would be sweet!

My stack sounds pretty quiet while normal driving/idleing, but barks like a Mother when i drop the hammer.

Definitley sounds better also than rear exit, can really hear the turbo/vanes !!

I used a piece of 4'' SS flex and 2- 4'' 90*'s up thru the bed.[/QUOT


Tim you don't have to modify the existing... I didn't just in case I wanted to put the tail section back in someday..

 

[lotsofmiles]

i'm jealous.

i want a stack too!:baby:

 

[TIM Z]

Jordan, i can get you a pic of the underside of my bed and how i ran my exhaust.

Your better off modifying your existing 4'' system.

Where do you want your stack placed?

I have a 5'' MBRP SS stack, i love it but i think 6'' would be sweet!

My stack sounds pretty quiet while normal driving/idleing, but barks like a Mother when i drop the hammer.

Definitley sounds better also than rear exit, can really hear the turbo/vanes !!

I used a piece of 4'' SS flex and 2- 4'' 90*'s up thru the bed.[/QUOT


Tim you don't have to modify the existing... I didn't just in case I wanted to put the tail section back in someday..

Yeah, either way is cool, im just saying/agreeing he doesnt need to buy the " stack kit "

 

[wikdlmm]

true your rite and lotsofmiles that would look killer sticking out of the hood of the van!

 

[TIM Z]

true your rite and lotsofmiles that would look killer sticking out of the hood of the van!

 

[tylerrustLB7]

Im thinking leave it chrome

 

[lotsofmiles]

yea. i know van stack!


want one on the truck. too much rearrainging to do in the bed for right now.

 

[wikdlmm]

Van stack was just a thought! Seemed like a good idea!

 

[lotsofmiles]

van stack would be sweet! about 1/4 inch higher than the roof, right thru the floor and roof in the back right corner. could double as a rear heater in winter and i'd have a spot to heat up my lunch.

 

[wikdlmm]

hell yea start cutting!

 

[dmaxfireman]

the only problem would be leaks, and the resonating if you fixed it to the body of the van would be awful. but would be sahweeet none the less

 

[Big Block 88]

Jordan, i can get you a pic of the underside of my bed and how i ran my exhaust.

Your better off modifying your existing 4'' system.

Where do you want your stack placed?

I have a 5'' MBRP SS stack, i love it but i think 6'' would be sweet!

My stack sounds pretty quiet while normal driving/idleing, but barks like a Mother when i drop the hammer.

Definitley sounds better also than rear exit, can really hear the turbo/vanes !!

I used a piece of 4'' SS flex and 2- 4'' 90*'s up thru the bed.

I would like to keep it so I could always just throw my other exhaust back on. I'll get my stack ordered and a 4" flex. Do I really need a 90* if I use that stainless flew pipe?

Hey Tim pics would be great whenever you have time.:hug:

 

[wikdlmm]

Yes stainless flex dosent bend farther than regular flex... U could prolly find one on eBay or some vendors here mite have one.. Check with chad. They sell badass clamps for the stack to the bed but there like $90.. I built mine. I will get pics if I get home before dark! O I also built a heat box to keep crap from melting to it

 

[Big Block 88]

So you think the flex can bend to 90* I know have seen it bend 90* on semi's.

 

[wikdlmm]

I could not get it to bend from there strait up through the bed.. But give it a shot!

 

[wikdlmm]

Just easier with a 90* to make the turn

 

[TIM Z]

So you think the flex can bend to 90* I know have seen it bend 90* on semi's.

no, it wont bend like you want, i'll try to get some pics today for ya how mine is setup. But like i said it all depends on stack Placement.

I kept mine on the right side of the bed so i could still put a 4 wheeler in there if i wanted.

If you want yours more toward the center you will get away with one less
90* .

 

[SmokeShow]

Tim Z's looks awesome IMO. It's not something you see very regular since it's so much easier to just go straight up from existing exhaust. His looks GOOD!!


C-ya