Silicone heater hoses

[N2BRK]

I talked to Dan. He says if I remove the clamps and lube under them replace that it will fix the problem. I’ll try it.

 

[TheBac]

Moved this over to the General area of Hard Parts. Applies to all models is why.

 

[slowlml]

Those spring clamps are for low pressure only

Their constant tension bolt clamps would likely work better then spring clamps. Same type used on the boost tubes

I was thinking that too. Bolt or worm drive clamps would be a better fit.

 

[Burn Down]

https://www.4statetrucks.com/engine-parts/semi-truck-2-25-inch-x-2-75-inch-clamp-constant-torque_46625.asp?gclid=EAIaIQobChMI-qSPmYuG4wIVEv5kCh3XbgNjEAQYESABEgKq6fD_BwE
This style works very well.
https://www.finditparts.com/products/8735793/breeze-b9226-0344-b?srcid=CHL01SCL010-Npla-Dmdt-Gusa-Svbr-Mmuu-K8735793-L367&gclid=EAIaIQobChMIzKPg6YuG4wIVFarsCh3QPQ2fEAQYASABEgKPefD_BwE

This style is more robust.

 

[N2BRK]

Good looking clamps. I was thinking something like the OEM clamps on the silicone boost tube hoses; this looks to be it.

 

[2004LB7]

McMaster Carr has T bolt style clamps with qnd without the springs. Some even made just for silicone hose

https://www.mcmaster.com/t-bolt-clamps