S483 twin turbo down pipe

[LLYSMOKE]

Im searching to see if anyone has or knows where i can get a down pipe for an s483 5" or 4" will work as it will be used. In a twin setup lme know if you guys know anyone thanks

 

[Evan@InglewoodTrans]

Who's twin kit?

 

[Harbin_22]

You are not going to be able to buy an off the shelf downpipe for that setup. Gonna have to be custom made. Too many variables on where the turbo is placed

 

[Mpsoldier]

What you are asking is if you can get a s400 exhaust flange to make a down pipe? If so I am pretty sure all you can get is a 5" and reduce it down to 4" then custom pipe to the exhaust. Correct me if I am wrong but that's what I think your asking

 

[plowboy_lbz]

You are not going to be able to buy an off the shelf downpipe for that setup. Gonna have to be custom made. Too many variables on where the turbo is placed

^^What that guy said. You need to go to the builder of the kit to get one, otherwise if its a custom built kit then you'll have to build one yourself.

 

[moparkxracer]

Contact Nathan at MPI he does an amazing job. I was worried going with 5 inch but I love the way mine fits.

 

[LLYSMOKE]

I was looking for someone locally in UT or Idaho I just don't have time right now to Fab one up with my work schedule. I just might have to give Nate a call

 

[S Phinney]

Fabbing one will require the builder to have your kit to fit correctly.

Sent from my XT1080 using Tapatalk

 

[Dirtymaxx03]

Contact SDP or WC Fab. I'm Sure they can ask you for a few measurements and whip up a downpipe that will work for you

 

[Evan@InglewoodTrans]

Contact HSP or WC Fab. I'm Sure they can ask you for a few measurements and whip up a downpipe that will work for you

While I could be wrong I doubt it would fit and I doubt anyone would agree to build it with just some measurements from someone else. I fixed your post for you also.

 

[LLYSMOKE]

Thanks guys I'm gonna have Nathan probabl Build me one since he has the kit right now
....