S400 Oil feed location

[LbzDMax07]

Where does the oil feed come from for a s400 single on a LBZ. I read the factory feed is plugged so where does the new feed come from?

 

[rfletes79]

You can use the factory supply location, just need the right fittings/line to connect from there to the turbo. That's is the easiest way.

Or you can tap into one of the main bearing oil plugs on the side of the block.

 

[b_r_a_d_79]

oil galley plug. there are two to my knowledge. One on the front passenger side of the block and one on the rear drivers side right below the oil filter

 

[paint94979]

I used the galley on the passenger side

 

[LbzDMax07]

Ok Thanks!

 

[LbzDMax07]

I used the galley on the passenger side

Looking at pictures of other kits it looked like the feed was routed down that direction. Ill go for that one

 

[durallymax]

I used the galley on the passenger side

x2

 

[95 z71]

I used the galley on the passenger side

x3

 

[moparkxracer]

Make sure ya pull an oil plug and not coolant. Lol