S372 installed!!!

[Righteyeblind]

I installed my S372. I got a RDL pedestal and purchased the S472 with a T4 flange from forced inductions. NIce product the only thing I dont like is the 4 inch outlet on the compressor side.
Turbo works nice 42 psi at 5600 ft elevation. Spool is about the same as my 4094R. I got the 1.0 A/R. I hope my bottom end will last but we will see. Its now in the paint shop so I will test it at the track next month.

 

[bullfrogjohnson]

looks very nice! I would get a 4"-3" reducer boot from raceparts and get rid of that giant elbow. You can also order a new cover with a v-band connection.

 

[RPM Motorsports]

It's good to see you back at it again! I thought we lost ya there for a while.

 

[TheBac]

Congrats on the install.

I am confused, though. Is it a 372 or 472? Both your post and your pics list both.

 

[Righteyeblind]

Congrats on the install.

I am confused, though. Is it a 372 or 472? Both your post and your pics list both.

Its an s472 with a t4 flange which makes it a s372 same turbos just different inlet.

 

[Righteyeblind]

looks very nice! I would get a 4"-3" reducer boot from raceparts and get rid of that giant elbow. You can also order a new cover with a v-band connection.

You cant redure mine because it is a 2.5" silicone 90 stock not a metal pipe

 

[bullfrogjohnson]

You cant redure mine because it is a 2.5" silicone 90 stock not a metal pipe

Get a Banks Tube. I just put one on mine and love it!

 

[TheBac]

Its an s472 with a t4 flange which makes it a s372 same turbos just different inlet.

Thanks for the explanation. I had no idea.

 

[soot04max]

Thanks for the explanation. I had no idea.

I was wondering the same thing, but didnt want to ask. so thanks for asking.

looks like a nice setup. and also seems like it would be cost friendly??

 

[bobxr50]

Lookin good! Should be fun when done....

 

[Righteyeblind]

I was wondering the same thing, but didnt want to ask. so thanks for asking.

looks like a nice setup. and also seems like it would be cost friendly??

Real cost friendly $1900 and i was on the road. I can't wait to play with it more after she gets out of the paint shop.

 

[SSchmi5519]

S472=T6 housing

S372=T4 housing

Each company calls it something different. There is an actual S372 that comes natively with T4 but has a big 72mm wheel in the S300 frame.

 

[IOWA LLY]

What did you use for a downpipe? Or did you make your own?

 

[Josh2002cc]

What did you use for a downpipe? Or did you make your own?

x2. Someone gave mine away so I need one for this very same installation.

Thanks. :thumb:

 

[Righteyeblind]

What did you use for a downpipe? Or did you make your own?

I would of made my own but I was pressed for time. I got one from ATS

 

[IOWA LLY]

I would of made my own but I was pressed for time. I got one from ATS

How well did it fit?

 

[Righteyeblind]

How well did it fit?

It fits alright some massaging needed. Plus I had to cut of the out let end because there are a couple bends and I couldnt get it in.

 

[SSchmi5519]

It fits alright some massaging needed. Plus I had to cut of the out let end because there are a couple bends and I couldnt get it in.

Did you try slipping it in before or after the charger was in place?

 

[Righteyeblind]

After. I should of before it would of been easier

 

[delong_1]

when i had my ak5 to get the downpipe in all i had to do was unbolt the trans and jack the trans up as far as i could. with the up pipe out it slipped right in, put the up pipe back on and that was it.