Anybody have any videos of their Lb7 with a s366 on stock cp3/injectors running? Or track videos? Just curious to see how they sound and how they run. Thanks in advance. :thumb:
LB7: s366/stock fuel video?
- Thread starter SparkZ03DMAX
- Start date
I am running that set up last year I ran a 13.0 haven't had time to run this year but with a better launch and maybe turned up a little bit ill be in the 12s
Here is my S364 on the dyno. Mine was a t3 housing though, so the 66's wouldn't spool quite as fast. My 64 was very similar to stock spool up. If I had to do it over again, I would have done a billet s472 instead after I put my 20 overs on.
https://www.youtube.com/watch?v=g4sJXPp3cCk
https://www.youtube.com/watch?v=g4sJXPp3cCk
Mine is an lly of course but very similar. Stock sticks and cp3. Ran the time in my sig, 12.05@112.
https://www.youtube.com/watch?v=1fWukrYakCs&feature=youtube_gdata_player
https://www.youtube.com/watch?v=Rt2IkiXRELg&feature=youtube_gdata_player
https://www.youtube.com/watch?v=1fWukrYakCs&feature=youtube_gdata_player
https://www.youtube.com/watch?v=Rt2IkiXRELg&feature=youtube_gdata_player
My LBZ back in 2010, HTT 66mm, loved the turbo.. Miss the metal intake noise to this day :rofl:
https://www.youtube.com/watch?v=zC0ZA951YUg
Blowing pipes off dynos back then too :rofl:
https://www.youtube.com/watch?v=YQRuizrMAYQ
https://www.youtube.com/watch?v=jotBgqXyAsg
Steve (sschmi5519) track runs
https://www.youtube.com/watch?v=cgJcDASa7Mo
https://www.youtube.com/watch?v=zC0ZA951YUg
Blowing pipes off dynos back then too :rofl:
https://www.youtube.com/watch?v=YQRuizrMAYQ
https://www.youtube.com/watch?v=jotBgqXyAsg
Steve (sschmi5519) track runs
https://www.youtube.com/watch?v=cgJcDASa7Mo
The 66 would spool faster then that 64 :thumb: been there done that hands down 66 could out spool the bd
http://youtu.be/3G8Q4RrfEB8
Hopefully the link works