Bumping this one back up, there are a few days left to take advantage of this sale!
The Dynomite Diesel launched their Labor Day sales event! This covers all of their products during until 9/6/2024 and is 10% off MAP. As always we offer free shipping (including core returns) for all non-freight items to forum members. Please reach out if you need anything!
https://dynomitediesel.com/
https://dynomitediesel.com/
Also here for discussion: Black Friday 2024 Sales!
I will be updating this as new sales come online!
Exergy: 10% off 11/29-12/2 on all items with the exclusion of billet fuel rails, Bosch Motorsport ECUs/components, and LML CP4.2 pumps.
Dynomite Diesel: 15% off all products with the exclusion of "Super Mental" line (custom sizing). This means the sizes below ARE included.
1) 01-10 Duramax, 150% and down
2) 11-16 Duramax, 45% and down
3) 17+ Duramax, 25% and down
4) 03-07 5.9L Cummins, 150% and down
5) 07.5-21 6.7L Cummins, 100% and down
6) 22+ 6.7L Cummins, stock
7) 08-10 6.4L Powerstroke, 100% and down
8) 11-14 6.7L Powerstroke, 45% and down
9) 15-19 6.7L Powerstroke, 45% and down
10) 22+ 6.7L Powerstroke, stock
FASS: Fass will be running a 10% off MAP sale 11/29-12/3.
JZ Mfg: I will be personally running a sale on these for Black Friday. I will be doing $100 off all turbos they produce AND still offering free shipping (including return shipping on reman VGTs). All VGTs come with gasket kits and remote oil feed lines.
Fleece: 15% off 11/29-12/13. The only exclusions will be their long blocks.
Forced Inductions: Various sales from 11/11/24-01/03/2025
1) $200 of FIS GTR (Garrett based) and S400s (includes BB GTR S400s)
2) $100 off S300 & BB S300
3) $75 off TDI billet S400
4) $25 off TDI billet S300
5) $50 off turbine blankets (T4, T6, & GT55)
K&D Service:
We are running a sale on in-house-built transmissions for Black Friday this year for any build booked/scheduled during the entire month of November.
We will be supplying an aftermarket Goerend flexplate and OEM bolt set with every transmission booked/sold until the end of 2024. I have a few cores here to build 01-16 units. I sadly do not have any 17-19 cores at this time but can build them if local to us.
Our builds are $5750 cash-and-carry (with a core) for a 750hp built unit and includes the below items:
1) Goerend billet stator billet cover converter of your choice (R, J, & AR and extreme clutch upgrade available for an extra cost)
2) New Allison speed sensor(s), pressure switch/manifold, wiring harness, and pump
3) New C1 (16 friction)
4) New C2 w/stock steels (7 friction)
5) New C3 w/kolene steels and LML pistons/return spring assemblies (6 friction)
6) New C4 w/kolene steels and LML pistons/return spring assemblies (6 friction)
7) Goerend deep pan w/new filters and internal filter lock
8) All new bearings/bushings/gaskets/seals
9) Hydraulic modifications for increased holding capability, shift quality/speed improvements, and additional circuit drilled for increased cooling
10) Case painted gloss black
11) New NSBU
12) New cooler fittings
13) K&D PTO covers
Above ~750hp we start adding billet and can work with a customer at that point.
All comp builds will come with the choice of billet flexplate OR Goerend/DHD style and aftermarket transmission lines.
Comp builds are $8995 cash-and-carry (with a core) and include all the items in our 750hp build PLUS:
1) C3 oiling lines
2) Billet input shaft
3) Billet C2 hub
4) Billet P2 planet
5) Billet output shaft
I will be updating this as new sales come online!
Exergy: 10% off 11/29-12/2 on all items with the exclusion of billet fuel rails, Bosch Motorsport ECUs/components, and LML CP4.2 pumps.
Dynomite Diesel: 15% off all products with the exclusion of "Super Mental" line (custom sizing). This means the sizes below ARE included.
1) 01-10 Duramax, 150% and down
2) 11-16 Duramax, 45% and down
3) 17+ Duramax, 25% and down
4) 03-07 5.9L Cummins, 150% and down
5) 07.5-21 6.7L Cummins, 100% and down
6) 22+ 6.7L Cummins, stock
7) 08-10 6.4L Powerstroke, 100% and down
8) 11-14 6.7L Powerstroke, 45% and down
9) 15-19 6.7L Powerstroke, 45% and down
10) 22+ 6.7L Powerstroke, stock
FASS: Fass will be running a 10% off MAP sale 11/29-12/3.
JZ Mfg: I will be personally running a sale on these for Black Friday. I will be doing $100 off all turbos they produce AND still offering free shipping (including return shipping on reman VGTs). All VGTs come with gasket kits and remote oil feed lines.
Fleece: 15% off 11/29-12/13. The only exclusions will be their long blocks.
Forced Inductions: Various sales from 11/11/24-01/03/2025
1) $200 of FIS GTR (Garrett based) and S400s (includes BB GTR S400s)
2) $100 off S300 & BB S300
3) $75 off TDI billet S400
4) $25 off TDI billet S300
5) $50 off turbine blankets (T4, T6, & GT55)
K&D Service:
We are running a sale on in-house-built transmissions for Black Friday this year for any build booked/scheduled during the entire month of November.
We will be supplying an aftermarket Goerend flexplate and OEM bolt set with every transmission booked/sold until the end of 2024. I have a few cores here to build 01-16 units. I sadly do not have any 17-19 cores at this time but can build them if local to us.
Our builds are $5750 cash-and-carry (with a core) for a 750hp built unit and includes the below items:
1) Goerend billet stator billet cover converter of your choice (R, J, & AR and extreme clutch upgrade available for an extra cost)
2) New Allison speed sensor(s), pressure switch/manifold, wiring harness, and pump
3) New C1 (16 friction)
4) New C2 w/stock steels (7 friction)
5) New C3 w/kolene steels and LML pistons/return spring assemblies (6 friction)
6) New C4 w/kolene steels and LML pistons/return spring assemblies (6 friction)
7) Goerend deep pan w/new filters and internal filter lock
8) All new bearings/bushings/gaskets/seals
9) Hydraulic modifications for increased holding capability, shift quality/speed improvements, and additional circuit drilled for increased cooling
10) Case painted gloss black
11) New NSBU
12) New cooler fittings
13) K&D PTO covers
Above ~750hp we start adding billet and can work with a customer at that point.
All comp builds will come with the choice of billet flexplate OR Goerend/DHD style and aftermarket transmission lines.
Comp builds are $8995 cash-and-carry (with a core) and include all the items in our 750hp build PLUS:
1) C3 oiling lines
2) Billet input shaft
3) Billet C2 hub
4) Billet P2 planet
5) Billet output shaft
Bumping this back up for December!
Dynomite Diesel: 15% off retail on all products with the exclusion of "Super Mental" line (custom sizing). This means the sizes below ARE included.
1) 01-10 Duramax, 150% and down
2) 11-16 Duramax, 45% and down
3) 17+ Duramax, 25% and down
4) 03-07 5.9L Cummins, 150% and down
5) 07.5-21 6.7L Cummins, 100% and down
6) 22+ 6.7L Cummins, stock
7) 08-10 6.4L Powerstroke, 100% and down
8) 11-14 6.7L Powerstroke, 45% and down
9) 15-19 6.7L Powerstroke, 45% and down
10) 22+ 6.7L Powerstroke, stock
K&D Service:
We are running a sale on in-house-built transmissions for Black Friday this year for any build booked/scheduled during 2024.
We will be supplying an aftermarket Goerend flexplate and OEM bolt set with every transmission booked/sold until the end of 2024. I have a few cores here to build 01-16 units. I sadly do not have any 17-19 cores at this time but can build them if local to us.
Our builds are $5750 cash-and-carry (with a core) for a 750hp built unit and includes the below items:
1) Goerend billet stator billet cover converter of your choice (R, J, & AR and extreme clutch upgrade available for an extra cost)
2) New Allison speed sensor(s), pressure switch/manifold, wiring harness, and pump
3) New C1 (16 friction)
4) New C2 w/stock steels (7 friction)
5) New C3 w/kolene steels and LML pistons/return spring assemblies (6 friction)
6) New C4 w/kolene steels and LML pistons/return spring assemblies (6 friction)
7) Goerend deep pan w/new filters and internal filter lock
8) All new bearings/bushings/gaskets/seals
9) Hydraulic modifications for increased holding capability, shift quality/speed improvements, and additional circuit drilled for increased cooling
10) Case painted gloss black
11) New NSBU
12) New cooler fittings
13) K&D PTO covers
Above ~750hp we start adding billet and can work with a customer at that point.
All comp builds will come with the choice of billet flexplate OR Goerend/DHD style flexplate and aftermarket transmission lines.
Comp builds are $8995 cash-and-carry (with a core) and include all the items in our 750hp build PLUS:
1) Extreme clutch Goerend billet stator/billet cover converter in any choice of stall
2) C3 oiling lines
3) Billet input shaft
4) Billet C2 hub
5) Billet P2 planet
6) Billet output shaft
7) Billet intermediate offered for $575 extra or can be included as the "free" sale item
Dynomite Diesel: 15% off retail on all products with the exclusion of "Super Mental" line (custom sizing). This means the sizes below ARE included.
1) 01-10 Duramax, 150% and down
2) 11-16 Duramax, 45% and down
3) 17+ Duramax, 25% and down
4) 03-07 5.9L Cummins, 150% and down
5) 07.5-21 6.7L Cummins, 100% and down
6) 22+ 6.7L Cummins, stock
7) 08-10 6.4L Powerstroke, 100% and down
8) 11-14 6.7L Powerstroke, 45% and down
9) 15-19 6.7L Powerstroke, 45% and down
10) 22+ 6.7L Powerstroke, stock
K&D Service:
We are running a sale on in-house-built transmissions for Black Friday this year for any build booked/scheduled during 2024.
We will be supplying an aftermarket Goerend flexplate and OEM bolt set with every transmission booked/sold until the end of 2024. I have a few cores here to build 01-16 units. I sadly do not have any 17-19 cores at this time but can build them if local to us.
Our builds are $5750 cash-and-carry (with a core) for a 750hp built unit and includes the below items:
1) Goerend billet stator billet cover converter of your choice (R, J, & AR and extreme clutch upgrade available for an extra cost)
2) New Allison speed sensor(s), pressure switch/manifold, wiring harness, and pump
3) New C1 (16 friction)
4) New C2 w/stock steels (7 friction)
5) New C3 w/kolene steels and LML pistons/return spring assemblies (6 friction)
6) New C4 w/kolene steels and LML pistons/return spring assemblies (6 friction)
7) Goerend deep pan w/new filters and internal filter lock
8) All new bearings/bushings/gaskets/seals
9) Hydraulic modifications for increased holding capability, shift quality/speed improvements, and additional circuit drilled for increased cooling
10) Case painted gloss black
11) New NSBU
12) New cooler fittings
13) K&D PTO covers
Above ~750hp we start adding billet and can work with a customer at that point.
All comp builds will come with the choice of billet flexplate OR Goerend/DHD style flexplate and aftermarket transmission lines.
Comp builds are $8995 cash-and-carry (with a core) and include all the items in our 750hp build PLUS:
1) Extreme clutch Goerend billet stator/billet cover converter in any choice of stall
2) C3 oiling lines
3) Billet input shaft
4) Billet C2 hub
5) Billet P2 planet
6) Billet output shaft
7) Billet intermediate offered for $575 extra or can be included as the "free" sale item