Man I feel like banning someone tonight, who should it be.:ban:
Was that a request or a command?...Sounds like you outta be careful what you type
Romper Room - paint94979
- Thread starter gmduramax
- Start date
Was that a request or a command?...Sounds like you outta be careful what you type
Was that a request or a command?...Sounds like you outta be careful what you type
Aint scared :rofl:
opcorn::giveup:
Nick your truck running yet
nope trying to figure out what bolts im going to use instead of the T-25 bolts
Im gonna try something Pat suggested then hopefully the regulator will come out and i;ll be up and running tonight might even head to Sacramento tomorrow and see if I can break into the 12.20's
Shouldn't you be watching the road Mr. :baby::hug:
I'm watching them clean up the track
...Someone oiled down...
I might have too, one of the regulator T-25 bolts was partially stripped from the last time the regulator was pulled out and then I had one good shot at breaking it lose but it just slipped off so im gonna take a chisel and make a divot at an angle then try to break it loose.
Never saw a connector like that with the wire retainer on my LLY, sorry Nick. Wheres it trace down to?
the only thing i can think of in that area on my lb7 anyway is the sensor ( i think F/P) that goes on the splitter right on top of the y-bridge mine has a sensor on the back side of it but connector looks diff . only 2 things there are that and turbo vain sensor , not to familiar with the newer motors .