Roll Pan Hitch

[BLKLMM]

I run Bigchevyhitch too. I just traded my hitch in towards a new one to come out behind the license plate. Should be here this coming week, Ill snap a few pics for ya.

That would help too thanks

 

[JoshH]

I bought it at a local farm/ranch/hardware store. If there are any Tractor Supply stores near you, they usually have them too, or you can probably find one online if you search 2" receiver tube.

 

[BLKLMM]

Cool thanks Josh:thumb:

 

[JoshH]

No problem.

 

[GeneralTJI]

Couple pics of mine... I kept it below the roll pan... so far so good. beefed up the receiver with an extra square tube and a piece on top to make sure it wouldn't be an issue....

 

[flyinelvis11]

here's pics of my big chevy hitch on an obs

http://s1035.photobucket.com/albums/a438/woller1/roll%20pan%20and%20hitch/

 

[othrgrl]

I made my own as well. It looks similar to Josh's with 4 x 4 x 1/4" square tubing. My tubing is a little lower so that the receiver would be running through it rather than notched into the bottom. I also kept the spare tire cross member and notched it out for the hitch so that I could still put a spare on it if I needed to for a long trip or to sell it.