Putting a cage in my regular cab. Just wondering how guys tie the cage to the frame? Was thinking of welding a piece of rectangle tubing to the frame so the bars go through the floor to that.
Roll Cage Questions
- Thread starter Ne-max
- Start date
Both my LB7 and my half ton are a 1 5/8 hole in the floor so the bar can weld to the frame. believe there has to be a 6x6" plate at the body joint as well
No need for a plate at the body, just at the frame. If it was a unibody it would be a different story.
You can use a square tube out rigger, radius tube or what ever you think will work and be the cleanest. I would gusset the tube to the frame if you use the tubing to frame (not a boxed square tube out rigger).
Triangulation and no dead nodes are your friend
You can use a square tube out rigger, radius tube or what ever you think will work and be the cleanest. I would gusset the tube to the frame if you use the tubing to frame (not a boxed square tube out rigger).
Triangulation and no dead nodes are your friend
Yes sir, atleast for 8.5 or slower cage. SFI rated becomes very specific for 8.49 and faster
