Replacing Torsion bars and Leaf Springs

0

08lmm72mm

Active member
May 13, 2019
537
168
43
Saskatchewan, Canada
Chevy1925 said:
Use your stock center pin as well unless it’s broke

But that other pack also is missing the plastic sliders that keep the springs from gouging into the keepers near the end of the leafs.

I’d send that wrong back and see if you can get the right one like the other. I wouldn’t doubt if spring rate is different too
Click to expand...

I guess I never thought about using the center pin that's in my stock leafs. Funny thing is the picture of the product on Dormans website shows no metal spacers between the leafs or the plastic sliders near the ends either go figure, and it's identical to the one.
 

Attachments

  • Screenshot_20211102-213313_Brave.jpg
    Screenshot_20211102-213313_Brave.jpg
    63.2 KB · Views: 46
Chevy1925

Chevy1925

don't know sh!t about IFS
Staff member
Oct 21, 2009
21,691
5,848
113
Phoenix Az
in that case, you might have lucked out with a litle better one. up to you if you want to try it once you put the shims in there.

also, dont crank the center pin too tight. they are grade 2 bolts.
 
  • Like
Reactions: 08lmm72mm
R

Ron Nielson

Active member
Oct 11, 2009
768
145
43
Berryton, KS
They are presumably the same part number, so they should be the same, not different. My truck doesn't have 1/8" spacers between the leaves, does yours? Let Amazon know that you have problems with the order.

According to Dorman, the spacers shouldn't be there. Dorman 929-126
 
0

08lmm72mm

Active member
May 13, 2019
537
168
43
Saskatchewan, Canada
Just got off the phone with Dorman tech support. The guy said the one with the spacers should be their updated one and recommended using the spacers out of my stock leafs for the new one without vs taking them out altogether.
 
You must log in or register to reply here.
Top Bottom