Is there away to do this without breaking the mirror. My drivers side blinker is not working. I have power where the mirror attaches to the door, but can't really get to the connector behind the glass.
Removing Glass in Tow Mirror
- Thread starter Grizz3500
- Start date
Here is a video Cornell made that explains it pretty good.
http://www.youtube.com/watch?v=felW5hWLLCQ&feature=g-user-u
http://www.youtube.com/watch?v=felW5hWLLCQ&feature=g-user-u
Haha I forgot I made that! You won't break/scuff anything if you do it with your hands/fingers vs using a pry bar, hammer, etc.. I made that video with my Dad's Denali but OEM towing mirrors all have the same 4 pressure tabs.
Thank You all for your help. Video was great. A wire for the blinker was broken behind the glass. Must of hung up while extending the mirror for towing.
My passenger side turn signal hasn't worked since I bought the truck a few months ago. I watched the video and mirror popped right off and looked and one wire is broke and it looks like the rest are ready to break. Now my mirror will not adjust. Going to get this fixed tomorrow. I'm so excited cause hopefully now the turn signal light will work.
Should be any easy fix. I just fed wiring slack from behind the door card thru the mirror extension until I had enough wire to make my repairs and reversed the process.
Well harbin_22 took care of me. Redid all the wires and everything works now. And this whole time I thought I was going to have to buy a new mirror or the lens.