Reg cab LMM projects is on its way!!

[coker6303]

Got it running. Took it out for a bit. We were all dead tired after very little sleep... So the wrong tune was actually loaded. It is the tune above my old crew cabs 11.8's which was around 680hp. This should be every bit of 750hp. Poor little stock motor!!! Woke her up from the dead and put her straight to work!!

Now on to the 4 link and 6.5' bed

JoshH needs a massage with a happy ending after all the hard work!


:thumb:

[YOUTUBE]jQEO44MrDvA[/YOUTUBE]

 

[Awenta]

Woooo! Awesome, nice work



Sent from my SM-N910V using Tapatalk

 

[TheBac]

Russ, if I look up the definition of "crazy" on Webster's, a picture of you and your truck pops up. :roflmao:

I dont know whether to send congrats or condolences. Either way, have fun. :thumb:

 

[Burn Down]

Congrats Russ! All that hard work is finally coming together:thumb:

 

[coker6365]

"Tire Spin" LOL:roflmao:

 

[superswamper003]

Definitely woke that motor up the hard way:woott:

 

[coker6365]

Woke it up long enough to check for leaks and get a little temp on it, then it was full throttle FTW!!! I will say though, after it ran for a bit, it was running smooth as a new one. Very impressive to say the least.

 

[skintback]

Sweet :thumb:

 

[SwitchBack]

I've been searching for the past two months for a clean Rc/lb lmm. Can't find them around me. Want to build one soon too.

 

[JoshH]

This one is far from clean!

 

[coker6303]

This one is far from clean!

Watch your mouth!! Betsy's Revenge can hear you and she hits back like Ronda Rousey

 

[JoshH]

Took the little truck out to a really crappy local 1/8 mile track last night to make a few passes. It still has a strange defuel right after launch that I've never seen before on any lmm I've tuned, but I managed to get it to run a best of [email protected] mph with a 1.83 60' time. This is with the very loose converter not locking until the top of third gear. Should be worth another tenth or two when I get a working lockup switch in it. Race weight right now is right at 6k lbs.

 

[matt78]

It sounds good spooling,I like the exhaust setup. Had fun last night.

 

[coker6365]

Is the lockup box not wired right?

 

[JoshH]

Is the lockup box not wired right?

Don't know. I just know it isn't working.

 

[coker6365]

Don't know. I just know it isn't working.

Don't take that tone with me! Lol. Remember the deal, if it worked I wired it... if not, Russ did it...

 

[JoshH]

Haha

 

[Burn Down]

:buttkick: F-ing Russ

 

[coker6303]

It's cuz the truck is white isn't it? I could hear Matt chanting "black trucks matter" all the way from Houston


:roflmao:

She's coming around quickly

 

[Awenta]

Sent from my SM-N910V using Tapatalk