Rear Suspension Set Up

[RobsDmax]

Have been pulling with my CCSB doing fine, decided to build and install some trac bars this week. Have a pull tomorrow and am planning on leaving the bars on, and airing the bags up to 100 PSI not to lose the hitch height. At this point is clamping the springs a necessity? Or overkill?

 

[Fasttoys450]

Well I have been doing the same set up with clamps but I loose 2 in of hitch hight so the next one I am going to try no clamps so I don't loose any hight you wanna stay as close to 26 or whatever your rules are

 

[cpr_454]

Clamp them anyways. Just a another measure to keep everything together.

 

[RobsDmax]

Well I have been doing the same set up with clamps but I loose 2 in of hitch hight so the next one I am going to try no clamps so I don't loose any hight you wanna stay as close to 26 or whatever your rules are

Ya I'm just afraid of it hoping, I think I will clamp them for tomorrow and lose the hitch height until I get my hitch done

 

[Fasttoys450]

Ya I am going to try without but who knows it may hop but I will soon find out but good luck with the pull