Rant about C notches

hondarider552

hondarider552

Getting faster
May 28, 2008
10,627
2
36
34
Arizona
Who actually has C notches for our trucks that will fit worth a crap? Ive bought 2 different bolt in/ weld in C notches, and both didnt fit, one was a 1500 notch, returned that, and 2nd was a DJM notch that I called about, and they told me it would fit, get it in the mail, and guess what, it was for a 1500. Returned that one too. I need one for my 2500 short bed, not a 1500. DJM says they cant sell me one for my 4wd because it only fits a 2wd, I told him the frames are the same :confused: I dont really wanna rig one and make one, as cuttting the frame is scary to me enough.

Im about ready to buy a 6/8 flip kit for a 2wd and use the frame notch included in the kit, unless someone on here knows what I need..??? :confused::confused:

If I cant find one im pulling off this damn lowering kit. :eek:
 
RENODMAX

RENODMAX

Dead Wrong
Mar 4, 2008
3,602
0
0
Why don't you just pay someone reputable to do the notch? Every good rear end build I have ever seen uses a custom fabricated c notch. I know thats not what you want to hear but honestly it would be the best way to do it. If that doesn't appeal to you then maybe the best answer is to pull your lowering kit off.
 
05chevy

05chevy

Active member
Jun 10, 2010
1,086
0
36
There is a local low rider shop around my area I can ask him.if he knows of anyone.or see if he will.make u one. But I'm pretty sure he makes all of his c notches himself
 
MMLMM

MMLMM

Tunergeek
Mar 2, 2008
4,086
2
38
43
Reno, NV
www.dyncal.com
nobody markets a part to cut the frame on a 2500/3500 because not many people cut up a 3/4 frame. 1/2 ton is where it is at.

If you dont care about the load anymore, go with a half ton notch, if you do still care for being a 2500 chassis, well then you have more problems anywway.

So..go custom notch, its pretty much only option.
 
McRat

McRat

Diesel Hotrodder
Aug 2, 2006
11,249
26
38
64
Norco CA
www.mcratracing.com
PS - DJM is really iffy stuff. I bought their lowering kit, and decided it wasn't strong enough for my application. Guess I should sell it. It's sitting around somewhere.
 
Chevy1925

Chevy1925

don't know sh!t about IFS
Staff member
Oct 21, 2009
21,685
5,840
113
Phoenix Az
hondarider552 said:
It's not that I dont mind having one made, it's just I dont know anyone well enough to trust them to make it.
Click to expand...

:confused: ill remember that :rofl:

If i had more time and running vehicles, id build you a notch buddy unless you can wait a few weeks?
 
05chevy

05chevy

Active member
Jun 10, 2010
1,086
0
36
McRat said:
PS - DJM is really iffy stuff. I bought their lowering kit, and decided it wasn't strong enough for my application. Guess I should sell it. It's sitting around somewhere.
Click to expand...

Wanna sell it? Can I still get 30x14.50 cheater slicks under it
 
hondarider552

hondarider552

Getting faster
May 28, 2008
10,627
2
36
34
Arizona
MMLMM said:
nobody markets a part to cut the frame on a 2500/3500 because not many people cut up a 3/4 frame. 1/2 ton is where it is at.

If you dont care about the load anymore, go with a half ton notch, if you do still care for being a 2500 chassis, well then you have more problems anywway.

So..go custom notch, its pretty much only option.
Click to expand...

Cant go with a 1/2 ton notch, frame are way different.

Chevy1925 said:
:confused: ill remember that :rofl:

If i had more time and running vehicles, id build you a notch buddy unless you can wait a few weeks?
Click to expand...

Except for you :spit: Dude my LBZ sits, you know that :rofl: Ive talked to grunion fabrications, they want 400 bucks out the door for a pipe notch. Might go that route.
 
MD-Dmax

MD-Dmax

New member
Jan 6, 2010
318
0
0
McRat said:
PS - DJM is really iffy stuff. I bought their lowering kit, and decided it wasn't strong enough for my application. Guess I should sell it. It's sitting around somewhere.
Click to expand...

what was wrong with the djm kit and if bobby doesnt want it ill take it
 
You must log in or register to reply here.
Top Bottom