LBZ: Quick DSP5 LBZ question

[twister773]

So im finally getting around to installing my dsp5 switch and using Trippin's scripts. I converted my stock tun to dsp5 and when i try to load alternate calibration for comparison it says it cant compare them because of different OS...because now the dsp5 os starts with a 5 and all the others with a 1...im sure it is something simple im doing wrong? Thanks

 

[twister773]

different computer and the problem is gone. Is it normal for the voltages for dsp to be set to zero after using trippin's script? Just input those manually? Also is it possible to make, say, position 5 be stock tune and a speed limiter of 30 mph? Ive tried finding out how to do it but no luck.

 

[LBZrcks]

You could make #5 anything you want, but the speed limiter is going to be the same for whatever tune you run. Do you have it set to serial or hardwired? Should be on serial, also I don't think you have to run any scripts on the lbz/lmm dsp5 tunes.

 

[twister773]

should be stock tune as the base with deep idle
1=trippin tow tune
2=Mcrat
3 & 4=same as base for now

 

[Jay P]

Try comparing to this one.

Jay