Question ???

[hondarider552]

Called a guy out over on the duramax forum, he has a 07 lbz built trans by PPE, water meth, PPE hot+2 twin cp3's and 4094 or 4088 turbo..

says he makes 720rwhp when they dynod it at PPE...

I call BS just that its a LBZ.
best time is like 12.61 @109.xxx

your thoughts ?

 

[SSchmi5519]

The twin CP3 makes sure that he has enough fuel, so that is covered.

Depending on the A/R he has on that 4094, its possible.

Do we know what kind of dyno it was?

With 720hp, he should be lower than a 12.6 though...

 

[LT1BRD]

The twin CP3 makes sure that he has enough fuel, so that is covered.

Depending on the A/R he has on that 4094, its possible.

Do we know what kind of dyno it was?

With 720hp, he should be lower than a 12.6 though...

unless he sucks at racing :rofl:

 

[SSchmi5519]

unless he sucks at racing :rofl:

Wow, that never crossed my mind.

 

[hondarider552]

He said it was done at PPE so maybe Dan will chime in...didnt even know PPE had one.

 

[TrentNell]

Pat put a LLY with a simaler combo into the mid 11's but had EFI , i dont doubt it can make 650-700 , depending on weight could explain the low MPH or it could just mean the dyno HP #'s were off , also were the #'s corrected or non corrected ?

 

[Iceman56]

A long time ago in a Diesel Power mag they had a LLY with 4094 twin CP3's and PPE tuner and it made 650hp........ So they say

 

[Redbowties88]

hes full o chit brian....

720 my ass....i bet he's under 600

 

[Mike L.]

Only special people get their trucks on the PPE dyno.

 

[TrentNell]

hes full o chit brian....

720 my ass....i bet he's under 600

109 mph says he is maybe over six ( depending on weight) ...................... by a little anyway , if he is 6900 lbs or heavier he is over 600 , stick an EFI tune on that truck and he would be able to push 700

 

[Turbotug]

hes full o chit brian....

720 my ass....i bet he's under 600

My truck made a tire spinning 588 with a single CP3 and HTT.

2 CP3s and a (possibly) larger charger should do better...

 

[Redbowties88]

My truck made a tire spinning 588 with a single CP3 and HTT.

2 CP3s and a (possibly) larger charger should do better...

true...but i wouldn't run a duel fueler on ppe tunes...no way

 

[LT1BRD]

Wow, that never crossed my mind.

"- Is that sarcasm? You wanna be sarcastic, you do it to your monkey friends. You do not do it to me! Do you understand?"

j/k :hug:

name that movie!

 

[whitetrash21]

Rundown... good stuff.

 

[maxaholic]

true...but i wouldn't run a duel fueler on ppe tunes...no way

Why not? If PPE makes dual fuelers I'm sure it was for a reason other than guys with efi.

 

[LT1BRD]

Rundown... good stuff.

Yes sir! :chicken2:

 

[SSchmi5519]

"- Is that sarcasm? You wanna be sarcastic, you do it to your monkey friends. You do not do it to me! Do you understand?"

j/k :hug:

name that movie!

Sooo f*^*#$& funny!!

"You want a little thunder?? How about a little lightning? Huh? Do ya?"

"--I'm just kidding, ill be in the truck!"

:rofl::rofl::rofl::rofl:

 

[NWTDIESEL]

I ran on PPE's dyno in 04'. It was real accurate from what i remember. I dont recall what kind it was though.

I put down 585 with a PPE hot+2, PPE trans, PPE lift pump, stock turbo, stock injectors, stock bottom end and 100 shot of juice

 

[mmangels22]

Only way to find out is meet him at a dyno place and see what happens. Then race him, and you will find out everything you need to know. Otherwise its just talk.

 

[hondarider552]

Only way to find out is meet him at a dyno place and see what happens. Then race him, and you will find out everything you need to know. Otherwise its just talk.

Yeah, I agree.