Pre filter install

[duramax on fire]

Just making another thread for a pre filter install may help someone else out. Previous owner already cut the fuel line and added a pump so my install was easy. 50 dollar total cost. Wix base and cat 2 micron filter. Changed the main filter also with a racor. So much easeir now changing filter every 10k. Main should be good for 50k.

 

[duramax on fire]

Another pic

 

[Yngdmax92]

Where do you buy the filter head and what's the part number? Very interested in this for mine

 

[TheBac]

Due to vibration, I would not trust a single weld to hold that bracket on.
Might be better to redesign it so you can bolt it thru the frame somehow.

 

[duramax on fire]

The filter base was a wix 24770. Less than 30 on Amazon and the cat number is 1r-0750. And of corse some 1/2" fuel line.

 

[duramax on fire]

Due to vibration, I would not trust a single weld to hold that bracket on.
Might be better to redesign it so you can bolt it thru the frame somehow.

My mig ran out of wire while welding. I'm going to finish it by going up the sides and a couple spot welds on the back. It won't be coming off.