Hey maybe you should load a koko willys tuna and you could break 500hp :roflmao: :roflmao:
oke: Ppei
- Thread starter Bonestock
- Start date
Hey maybe you should load a koko willys tuna and you could break 500hp :roflmao: :roflmao:
oke: 
Ya last year weekend on edge I was running 1700 usec and now with Kory's tuning I am running 2650 usec....
Ya last year weekend on edge I was running 1700 usec and now with Kory's tuning I am running 2650 usec....
Also went 12.8 last year @105 with 1700 us... in the big heavy pig!
Hey maybe you should load a koko willys tuna and you could break 500hp :roflmao: :roflmao:
i did break 500! 501hp thank you very much! sucks you lost to a sub 500hp tune.........................................twice
:roflmao:
How many miles are on your truck or better yet CP3? Very impressive and I am excited to see what she can do down the track! :happy2:
35,000 miles. I only have about 4,500 miles on the turbo kit, trans, cp3 and about 700 miles on injectors. I will be running the truck with 305/50/20 nitto 420's @ Billings NHRDA this year August 25th as long as shes still holding rods....
35,000 miles. I only have about 4,500 miles on the turbo kit, trans, cp3 and about 700 miles on injectors. I will be running the truck with 305/50/20 nitto 420's @ Billings NHRDA this year August 25th as long as shes still holding rods....
Just a baby! Haha I've got right under 59,000 on my truck and my cp3 holds 25,000-26,000 rail pressure at WOT for now so makes since how yours is holding up well! I'm running 305/50-20 420s as well and aired down on a decently prepped track they hold awesome! Good luck and lets see some time slips after! :thumb:
Hey maybe you should load a koko willys tuna and you could break 500hp :roflmao: :roflmao:
PARTY TIME!!!! Haha!
Ya I am glad we stopped where we did. I kept asking for more & Kory said I don't think we should go anymore. Pretty cool but next is built engine & then the real fun begins!:thumb:
has to be the strongest stock cp3 out there lol
congrats on the solid number. I can just hear the motor screaming from here tho lol
congrats on the solid number. I can just hear the motor screaming from here tho lol
That's what I was thinking when I read it is running 80% injectors with 2650 pulse width and only losing 500 psi on the rail pressure.
Ya, Industrial did the nozzles and Kory thought they possibly are smaller than 80% with all the usec. Either way it went from 648hp to 776hp with Tuning and injectors on same dyno.