ported fuel rail fitting

[FarmDiesel22]

What size hole is in the ported fuel rail fitting? Got a pull coming up and I am going to try and drill it out.

 

[UPnGONe]

how about you just buy one from them so you know its right

 

[MMLMM]

First off why does it need to be bigger? What size is your stock one and why.......?

 

[deerejohn]

its 1/8 inch drill bit

 

[ripmf666]

For 35.00 I will ship you one I have already done.

 

[FarmDiesel22]

I don't want to lose rail pressure half way down the track. I drilled it out on saturday cause the ppe one never showed up. It turned out pretty good.

 

[MMLMM]

I don't want to lose rail pressure half way down the track. I drilled it out on saturday cause the ppe one never showed up. It turned out pretty good.

That doenst prevent rail pressure drop..If anything you could loose rail pressure easier..

 

[Dan@PPE]

I don't want to lose rail pressure half way down the track. I drilled it out on saturday cause the ppe one never showed up. It turned out pretty good.

What do you mean it "never showed"?

 

[FarmDiesel22]

I didn't order it from ppe. I ordered it from someone else and it never showed. Not ordering from ppe was a mistake on my part.

 

[Dan@PPE]

What dealer did you order it from if you dont mind me asking? You can Pm me if you want...

Dan