please post 60 ft. times

[bigbird]

as well as tires and size. thanks

Kelly

 

[gmduramax]

Stock 265/70/17's best I could get was a 1.69
305/50/20's yokohoma's 1.71

 

[TrentNell]

295/45R20 TOYO PR0XES best was 1.76 1 time, average 1.8's
305/45R18 MT drag radials 1.64 but think they have more in them .

 

[paint94979]

1.64 60' with Toyo Proxes S/T 275/60/R16 there is more left in them

 

[MaxPowerLB7]

Falken STZ04 285/60/18 1.69 best mid 1.7 average
Nitto Dune Grappler 285/65/18 1.78 best 1.9 average

 

[DuramaxPowered]

Best ever 60' 1.68 with stock turbo....285/75/16 yokohama geolander at's on pyo's.........36 PSI front, 32PSI rear

 

[TheBac]

1.70 best with 265/75/16 Michelin ATX m/s (worn)
1.75 best with 275/70/16 Toyo Proxes ST

 

[S Phinney]

1.87 with 35's on the stock engine leaving at 10 lbs boost. Have not ran with the new engine.

 

[duramax215]

with ppe on 220 my best was a 1.90 with 285/75/16 on kmc hoss rims on stock tran

on edit: mine was on dick cepek mud country tires

 

[RPM Motorsports]

1.63 275-55-16 M&H DR's. You can also get this info from the time slip Data Base.

 

[12secondhandshaker]

1.701 Toyo Proxies S/T 265/70/16, stock charger, manual trans

 

[skintback]

High 1.7's 265/75/16 A/T's on stock wheels

 

[DMAXchris]

1.74 on Mastercraft Courser A/T 265/70R/16's on PYO's

 

[DmaxHawk]

1.7s 30X14-16lt M&H cheater slicks

 

[hondarider552]

1.67 best on 265/70/17 toyo HT's

 

[sweetdiesel]

1.74 was prob my best but averaged 1.78 that was with 35" BF mud terrains

 

[Micheal Tomac]

On my 11.24 pass the 60' time was a 1.66

My best ever 60' time was a 1.63

I have a pile of timeslips with 60' times in the 1.63-1.69 range dating back to 2003. My dragracing chassis setup hasn't really changed. I've always just lowered the torsen bars, clamped the springs, set the rancho shocks on 9 front/9 rear and run wore 285x75x16 BFG AT's on stock aluminum rims. I only launch with 10-15 psi of boost (measured at the compressor housing) and I always run in T/H mode with the Elocker on and the copilot on kill (locks up as soon as the allison gets into 2nd gear).

I even tried a set of 285x60x17 toyo proxes on 17x8.5" H2 rims but I couldn't get any better 60' times with them that I was getting with the BFG AT's.

 

[bigbird]

On my 11.24 pass the 60' time was a 1.66

My best ever 60' time was a 1.63

I have a pile of timeslips with 60' times in the 1.63-1.69 range dating back to 2003. My dragracing chassis setup hasn't really changed. I've always just lowered the torsen bars, clamped the springs, set the rancho shocks on 9 front/9 rear and run wore 285x75x16 BFG AT's on stock aluminum rims. I only launch with 10-15 psi of boost (measured at the compressor housing) and I always run in T/H mode with the Elocker on and the copilot on kill (locks up as soon as the allison gets into 2nd gear).

I even tried a set of 285x60x17 toyo proxes on 17x8.5" H2 rims but I couldn't get any better 60' times with them that I was getting with the BFG AT's.

I launch around 25-30 lbs. and have been wondering if i need to cut it back a bit.

 

[Gasuout]

1.91 was my best so far 4wd . Not to bad for 12,000 lbs .

 

[paint94979]

1.91 was my best so far 4wd . Not to bad for 12,000 lbs .

ya no shit Johnny lol that is damn good