Planned build

[paint94979]

So after debating on what to do with my engine for awhile I decided to just build the damn thing. Back in March my truck with a slipping transmission made 649hp which is down 52hp from the same tune and dyno. I kinda miss racing .

Parts:

Exergy 60% overs
Carrillos
Cut stock pistons if they show significant signs of abuse I'll grab some pistons from Fingers
Alternative firing order cam mild no reliefs required
Hamilton springs
Head and main studs
Gasket kit
Bearings

Probably call it a day around 850hp but you never know

 

[Chevy1925]

:rofl::rofl::rofl:

april fools was 22 days ago ya know

 

[TROJAN366]

Once you have the motor you will push it! Start out with finger's pistons and a set of 100 overs and save yourself time and money a year from now!!!

 

[paint94979]

Haha I have said I'm building it for years... This time I'm serious. I've got the money set aside for the emergency if it popped well it's cheaper to do it while it's running

 

[duramaxzak]

It's about time! :thumb:

 

[wrcknkrw]

You are still stock fuel aren't you?

 

[paint94979]

Once you have the motor you will push it! Start out with finger's pistons and a set of 100 overs and save yourself time and money a year from now!!!

100's unfortunately smoke under light throttle and considering I'll be running a big single I'll probably stay with 60's... California's fines are huge for smoke

 

[paint94979]

You are still stock fuel aren't you?

Stock injectors with a modified cp3... My truck won't know have to react to anything under 3300pw haha

 

[juddski88]

I say 100s and biofuel

 

[S Phinney]

100 overs can run as clean as 60 overs. Going bigger then you really start running into more of the smoke at intermidiate throttle.

 

[Mike L.]

Did your girl friend ok this Nick?

 

[SickLL7Crenshaw]

:rofl::rofl::rofl:

april fools was 22 days ago ya know

:roflmao::roflmao:

We need another voting poll for this thread

jk sounds like a fun build Nick :thumb:

 

[paint94979]

Did your girl friend ok this Nick?

She just got a raise her spending is the issue not mine haha

 

[Chevy1925]

Haha I have said I'm building it for years... This time I'm serious. I've got the money set aside for the emergency if it popped well it's cheaper to do it while it's running

when you send me pics of it out and apart, ill finally believe it

keeping the single 75 on it for those goals?

 

[paint94979]

Ya I'll keep the 75mm for now

 

[Noreaster]

about time
what size TW you running now?

 

[paint94979]

3300 right now been that way for 8? Years lol. Always ran detorqued tuning though

 

[Noreaster]

TW- turbine wheel

 

[paint94979]

I thought you meant PW... Turbine is 83mm. I'll probably have the turbo rebuilt and go to an 87mm cause that's the cheap part in a build

 

[hondarider552]

I'll send you some pistons that will run good... even if you don't make 1khp you can say the pistons did. :hug: