Oil gallery plugs

[JoshH]

Simon, you're the luckiest person I know...

 

[sweetdiesel]

:rofl:Luck, It just ouzes from my pores Josh

 

[JoshH]

See the last line of my signature

 

[LBZ]

Hee Haw - Yup that's Simon!!

 

[Accelerator]

Going to amsoil 100% synthetic and useing the block heater will drop starting oil pressure alot.:hug:

 

[sweetdiesel]

Going to amsoil 100% synthetic and useing the block heater will drop starting oil pressure alot.:hug:

Im not into useing Amsoil for break in. (to expensive and dont like it anyway) And the block heater does NOT help( i still use it ).I have a oil heater magnet that DOES help a bit.

Cold start are not my biggest issue, WOT is(was).

 

[skintback]

Did you use silicone or loctite to seal them up

 

[sweetdiesel]

Did you use silicone or loctite to seal them up

I used liquid hi-temp teflon paste since it seal nicely on my other fitting in the oil gallery

 

[sweetdiesel]

Ttt

 

[LBZ]

A good reminder for anyone doing a build!! I popped mine out before I washed the block up so it would remember to be tapped and plugged later!

 

[skintback]

I did mine :thumb: