Nwtdiesel dyno results

[NWTDIESEL]

Mike and i made the first pull at Diesel Specialists in Las Vegas Nevada today.

On the level 3dsp tune i made 746wrhp, Mike refined that tune and we made another pull of 753rwhp.

I started to make a pull on my level 4dsp tune when i felt a vibration and shut it down. Im loosing trans fluid out of the pan gasket (rear of trans area) and i have a bad vibration when its in park, neutral or drive. When driving it vibrates bad too.

I drove the truck back to Mikes from the dyno shop, its still leaking fluid. Im going to clean it up with brake cleaner and see if i can find the issue.

Hopefully we can get it back on the dyno soon so i can try my level 4dsp and my level 5dsp nitrous tune.

 

[Kat]

Congrats :rockon:

Hope it's an easy fix

 

[NWTDIESEL]

Congrats :rockon:

Hope it's an easy fix

Thank you, im letting the truck cool down in this 110 deg temp then ill climb under it and see whats going on.

 

[S Phinney]

Sounds good Newly. Hope the tranny will be okay. I was looking forward to seeing how it turned out with Trent at the track.

 

[MadMaxx61]

Congrats man

Ya I hope it is a quick fix and back to make some sweet numbers.

 

[IdahoRob]

Good #'s. Hope you're up and rolling soon.

 

[NWTDIESEL]

Sounds good Newly. Hope the tranny will be okay. I was looking forward to seeing how it turned out with Trent at the track.

I was looking forward to it too. Ill see what the issue is here in a bit.

 

[Big Block 88]

Pretty mean number Newly. Hope it's an easy fix fo you man.

 

[NWTDIESEL]

I think i cracked the tcase adapter...

 

[Big Block 88]

Doooh!!! Do you run a brace?

 

[NWTDIESEL]

Doooh!!! Do you run a brace?

Yes, i run a suncoast brace.

I had to of bent something inside cause the cracked tcase adapter doesnt explane the vibration. Ill inspect the flexplate bolts, TC bolts here in a bit.

 

[Redbowties88]

nice numbers newly...hope you can get the trans straightened out without too much trouble

 

[McRat]

750+ ain't too shabby. :cool2:

Yes, that sounds more like converter/flexplate issues. Tcase shouldn't be loaded on the dyno.

 

[TrentNell]

I am sorry to hear and hope you can get it fixed in time, the #'s look real good and should be a strong runner .

 

[Big Block 88]

Yes, i run a suncoast brace.

I had to of bent something inside cause the cracked tcase adapter doesnt explane the vibration. Ill inspect the flexplate bolts, TC bolts here in a bit.

Kinda what I was wonerin somethin has to be bent in there. Hopes it's no0thin to big man best of luck. U-Joint maybe? That would be to easy though

 

[NWTDIESEL]

750+ ain't too shabby. :cool2:

Yes, that sounds more like converter/flexplate issues. Tcase shouldn't be loaded on the dyno.

Yea, your right. What would cause the leak then? Fluid is coming out from around the rear of the pan by the two bolts that hold the trans up. Ill get in there in a few and check it out.

The vibration is bad but it shifts nice and drives fine?????

 

[Builtlngbd]

wonder what it was.........Numbers lookin GOOD

 

[CHYKYNLIPS]

Those numbers are impressive. Hopefully, your tranny issue isnt too excessive. Wow, on your nitrous tune, are you suspecting breaking 1000 at the wheels?

 

[NWTDIESEL]

Those numbers are impressive. Hopefully, your tranny issue isnt too excessive. Wow, on your nitrous tune, are you suspecting breaking 1000 at the wheels?

Im not sure WTF s going on. Truck started up smooth and idled perfect for about 20 seconds then it started shaking. Is this because the TC is broke and not flowing fluid? Could this cause the leak in the rear or the trans too?

Im looking for 800hp on fuel and ill be happy withh 900+ on nitrous.

 

[Gasuout]

Congrats on the numbers , and sorry to hear the trans is jacking with you .

Im sure you will figure it out though . Good Luck .