no fuel pressure

C

cjohns05

New member
Feb 18, 2009
8
0
0
ross
So I have been very slow at getting my engine back together. Now that i have it back together i cannot get any rail pressure. The injectors are new and assuming that everything else is right, is there a possibility that the cp3 could be gunked up enough that it will not flow fuel. The pump was good when removed and sat for about a year or so.

Also, even if the injectors are new could they still gunk up will in the box.
 
C

cjohns05

New member
Feb 18, 2009
8
0
0
ross
i have swaped regulators. I was just wondering if the cp3 could gunk up like an injector. I have a few other things that i need to try and there is always the possibility that i just do not have the system primed yet.

I am just trying to eliminate possibilities
 
C

cjohns05

New member
Feb 18, 2009
8
0
0
ross
I have read through some of the other post and this was jsut one other question that i had come up with.
 
paint94979

paint94979

Beer Nazi
Sep 18, 2006
11,715
8
38
37
bad sensor? it is uncommon to hear of 0 fuel pressure but it could always happen. When you prime for fuel does fuel come out?
 
HurtMan

HurtMan

Point of no return
Dec 21, 2009
59
0
0
Ogden Ut.
New injector problem (didn't loose a puck in assembly)???just a thought :rolleyes: Try checking with a manual guage (high pressure side)
 
dmaxfireman

dmaxfireman

'Can do' kind of guy
Apr 8, 2007
2,329
1
38
CT
with one injector hung (lost puck) you will still read between 500-2000psi rail pressure.
 
You must log in or register to reply here.
Top Bottom