LBZ: new track times!

[bluessmax]

Holy shit....Stock turbo, no spray?

Sent from my SCH-I605 using Tapatalk 2

Nah 72vgt and 100 shot because I was unable to make more than 30lbs!! It was perfect then the Ecu got pissed so we hooked spray up at the track to make up for the lack of 12lbs! Found out the vane sensor went to crap and that's why it would only make 30... All is well now with no spray needed at 42lbs again... Stronger than it was with 100 shot.

 

[FC5452]

Kory think I have a seal that may have let go on the turbo. How much fuel do I need to light that off that r&d turbo

 

[bluessmax]

Kory think I have a seal that may have let go on the turbo. How much fuel do I need to light that off that r&d turbo

A few hundred more microseconds and degrees of timing ... Along with a few other tricks

 

[FC5452]

Give me a call now that I'm back where this dang phone will work. When you have free time lol.....

 

[Duramax5]

My best of 13.1 @ 101 is on a stock trans n converter with 20's. 1.78 60' and 8.3 1/8th. Let the truck sit for about an hour and ran 8.2 in the 1/8th and forgot to shift outta 4th so it fell on its face for a second but still managed a 13.1. really think it could have been a 13.0

 

[bluessmax]

My best of 13.1 @ 101 is on a stock trans n converter with 20's. 1.78 60' and 8.3 1/8th. Let the truck sit for about an hour and ran 8.2 in the 1/8th and forgot to shift outta 4th so it fell on its face for a second but still managed a 13.1. really think it could have been a 13.0

What rpm are you shifting at?

 

[Duramax5]

3600-3800 on the 4th-5th shift. the time it went 8.2 it went over 4000

 

[bluessmax]

It may go faster at 3300-3500rpms as it may hold a little better pressure there!

 

[Duramax5]

I'll try it next time out, I can't let it shift at 3200 cuz it'll limp.

 

[blk smoke lb7]

I'll try it next time out, I can't let it shift at 3200 cuz it'll limp.

Why?

 

[Duramax5]

Stock tc shakes real bad if the rpms drop so low goin into 5th

 

[07bluelbz]

Hey Johnny there is this guy Kory knows named Brad and well, he fixes tranny's lol. Just saying.

 

[Dirtymaxx07]

Damn, so it don't sound like I'm far off of everyone with stock trans. Hopefully my built trans will be end by the end of the month. Got all my parts yesterday so may pull it next week and get the show on the road.

 

[Duramax5]

Hey Johnny there is this guy Kory knows named Brad and well, he fixes tranny's lol. Just saying.

I want a 12 on stock trans first,Lol

 

[FC5452]

I want a 12 on stock trans first,Lol

I can concur with that statement :thumb:

 

[Duramax5]

I can concur with that statement :thumb:

What's your best?

 

[FC5452]

That 13.1 flat, when I ran that I spun the tires out of the whole a little bit, enough to cost me a 1/10th or two. Nadm in Numidia I will change up the suspension some. The truck has it in it, would like to do it on the stock trans, but we know how that could play out

 

[SickLL7Crenshaw]

I ran a 13.5@97 in my 225k lb7 stock trans with bens lock up box and gets beat on everyday with a 475 tune. Built on a wed i guess

 

[quinton]

Lb7 runnin 13.2 with 300k miles on it here in Texas... All stock.. Work truck.

 

[Dirtymaxx07]

Damn I want to go back to the track... Lol was wanting a 12.99 before trans but so far hasn't happened haha