NEW TO THE FORUM

[Tommy's Auto]

I'm new to the forum, but not new to the Duramax world.
I own a shop "Tommy's Auto in Springville, UT". We buy salvage Duramax trucks and rebuild them, been doing the rebuild thing for 39 years. We also have approximately 60 Duramax trucks from LB7 to L5P that we part out.
The reason I joined the forum is because I'm toying with the idea of building me a 2006 Silverado 2500 crew cab short bed, but I'm going use a complete rolling frame from a 2015 because of how much stronger they are, the heavier suspension, and bigger brakes. I was going to go with a built LBZ, but now thinking L5P and maybe the 10-speed.
YEAH, I KNOW, here comes all the comments about why go to that much trouble? Or, it's not worth the time and effort. Well that's for me to decide what to do with my time and money. Sorry for the rant, but you all know it's coming.
I know a few people have done similar swaps and I would be SOOO grateful for any information on do's and don'ts about a swap like this.
The pictures are of the last 2006 GMC LBZ that I built a couple of years ago, it had only 66K miles on it.

 

[TheBac]

Um, you're on a forum where "doing crazy shit" used to be pretty common. Welcome.

 

[2004LB7]

Yeah, as Tom said.

Only time we usually tell someone their crazy or not worth it is if they don't have the knowledge, money or time to do it, or do it right. We are pretty realistic here with what can be done. But you are also going to be taking to a bunch of die hard modders and performance freaks so this something we would probably all want to do if we had your parts and resources. So I say build away and keep us updated on progress

I vote for classic GMC body like from an 03 LB7 to LBZ, Engine and transmission from L5P, LB7 emissions, and whatever frame you can fit under it from LML or L5P. If you can fit an L5P frame then that would simplify the engine and transmission mounting.

 

[1FastBrick]

That would be sweet to put a GMT800 body on an L5P chassis.

 

[dirtydmax]

I like the way you think,Welcome and can't wait to see some builds

 

[Bdsankey]

Welcome! I do like your thinking!

 

[Nate’s Dmax]

That would be an interesting build. I’ve been toying with the idea for some time now. What I haven’t been sure of is how to make the classic ABS work with the bigger brake system of the LML and up trucks. On other problematic point for me is how to mount the LBZ in a LML frame as the LBZ mounts are offset and LML are straight across. You wouldn’t need to go with 2015 frame to get the heavier frame as that started in 2011.

 

[Tommy's Auto]

That would be an interesting build. I’ve been toying with the idea for some time now. What I haven’t been sure of is how to make the classic ABS work with the bigger brake system of the LML and up trucks. On other problematic point for me is how to mount the LBZ in a LML frame as the LBZ mounts are offset and LML are straight across. You wouldn’t need to go with 2015 frame to get the heavier frame as that started in 2011.

I already have a couple of 2015 LML frames from trucks that we dismantled. I thought I was somewhere that someone had motor mounts to fit the L5P into the LML frame. I gotta do a little more looking. As for the ABS stuff, if I can't figure it out, I'll just disable the ABS system. I can drive without ABS.

 

[Tommy's Auto]

I put the 2006 bed on the 2015 frame the other day and 6 of the 8 holes lined up. It won't take much to get the other 2 lined up. I can't wait to put the cab and front end on and see how the rest of it mounts and lines up. If I do go through with the L5P, this is the one that I'll use. It's a 2023 and has only 14K miles.

 

[Nate’s Dmax]

For motor mounting Werli Fab could surely put something together for you. All it would need to be is a L5P engine side with a LML frame side in there custom mount line. The bed bolts that dont line up are the next forward from rear ones right? If you do get the L5P running in the classic body make sure you document the process so you can help others do the same thing. There may already be someone out there that has done it if you can find them.