Hey guys i am new to pulling i have 05 lly with bullydog intake edge programmer and an aftermarket exhuast. there is a truck pull coming up can anyone give me some tips. Tire pressure, gear anything will help. thanks
New to pulling help please
- Thread starter 05DMAX1520
- Start date
3rd gear low range, drop your t-bars all the way down in the front, get some spring clamps for the rear and air pressure depends on the track and what tires you are running.
and last just have fun
and last just have fun
yes everything will be fine on level 5, just make sure the front end is dropped down. Yes put it in Tow haul mode.
I may be wrong but im thinking if the track is packed down well those tires will do really well. But either way take air out of the fronts. If soft a lot to get all the grab you can. Thats just the way i do things
DON'T DO IT ...........YOU WILL BE HOOKED & THAT = $$$$
Try to get your hook point as close to the truck as possible and right at 26'' high if thats the rules. Roll into the throttle for about 10 feet then hammer down. If it starts to hop bad get out of it or you will be lookin for a ride home........good luc
Try to get your hook point as close to the truck as possible and right at 26'' high if thats the rules. Roll into the throttle for about 10 feet then hammer down. If it starts to hop bad get out of it or you will be lookin for a ride home........good luc
Im just here in central california. I wish we could get some more big events out here but not too much yet.