New high capacity trim valve springs

[mike diesel]

Built a 6 speed tonight for a buddy with these springs. They are sweet.

 

[Woodster]

How are these springs acquired?

 

[S Phinney]

Mike, Evan at Limitless or maybe Suncoast.

 

[MAXX IT OUT]

Bumping this up, anyone have any sets extras? Mike, I called Dave and left him a message, but i haven't Heard back yet. Will Ratiotek make another batch of them or is this a one time production?

 

[Mike L.]

Bumping this up, anyone have any sets extras? Mike, I called Dave and left him a message, but i haven't back yet. Will Ratiotek make another batch of them or is this a one time production?

Ratiotek did not make these springs. I did. I only sell them to dealers.
Try ATP, All Seasons, and a few more.

 

[MAXX IT OUT]

Ratiotek did not make these springs. I did. I only sell them to dealers.
Try ATP, All Seasons, and a few more.

I will keep looking, just trying to see if anyone, individuals people on here and any sets.
I guess I misunderstood what you said here.

The Ratiotek springs are my springs. My shift valve springs and HC trim springs enhance the whole set up.:thumb:

 

[c20elephant]

Evan at Limitless Diesel has them, that's who I purchased mine from.

 

[Robby05]

http://dirtyhookerdiesel.com/i-21245091-trim-spring.html

 

[MAXX IT OUT]

http://dirtyhookerdiesel.com/i-21245091-trim-spring.html

Yep, This is where i ended up getting them from, along with some other stuff.

Evan at Limitless Diesel has them, that's who I purchased mine from.

I have to thank Evan and Tony for answering all my questions and getting me pointed in the right direction.:thumb:

 

[The Dude]

Only 2 springs are needed is that correct?

 

[Robby05]

I bought the shift valve springs also

http://dirtyhookerdiesel.com/i-21262955-dhd-rt-a-es-shift-valve-springs.html

 

[Mike L.]

Only 2 springs are needed is that correct?

You need all 5 springs to get the full effect.

 

[MAXX IT OUT]

You need all 5 springs to get the full effect.

The 5 springs your talking about are the 3 Shift springs and the 2 trim springs, Correct Mike?

 

[Mike L.]

The 5 springs your talking about are the 3 Shift springs and the 2 trim springs, Correct Mike?

Yes. They work even better when installed with my pressure regulator spring.

 

[The Dude]

Yes. They work even better when installed with my pressure regulator spring.

So I need 5 of the valve trim springs and then how many pressure regulator springs??

 

[Mike L.]

So I need 5 of the valve trim springs and then how many pressure regulator springs??

3 shift valve springs, 2 trim valve springs, and 1 pressure regulator spring.
Trans has to come out for the pressure regulator spring.> ( only changed at rebuild )

 

[MAXX IT OUT]

Mike, What pressure does your spring put line pressure up to.

 

[The Dude]

The 5 springs your talking about are the 3 Shift springs and the 2 trim springs, Correct Mike?

I didn't see this.. I spoke to a Very sharp girl at DHD that schooled me on this. 2 shift springs, 3 shift valve springs and I got the pressure regulator spring as well.. I'll have all that put in with the Transgo and new transynd and spin on filter. Ill probably spring for the PPE cooler as well.

 

[mike diesel]

Mike, What pressure does your spring put line pressure up to.

Spring alone is 290psi.

Spring and 1 shim is 320ish psi.

Spring and 2 shims is 340-350psi.