New guy needs more hp

[HoleMaker]

Hi all, I'm new here from Alberta, Canada and looking for some more power maybe a turbo or efi? Not sure what you can do on a stock motor?


---
I am here: http://maps.google.com/maps?ll=51.115598,-114.050012

 

[ikeG]

A good EFI tuner should be able to get you tuned to ~500 rwhp on the stock turbo.
Be a good idea to start there and ditch the duramaximizer , etc.

 

[emiller3]

Welcome, efi and a turbo upgrade such as a 366 would do you well for a while.

 

[PAT]

Intake, exhaust, egt/boost gauge, lift pump, EFI live.
You will easily have 500 to the wheels with that.
I'd also do it in that order.

 

[ripmf666]

Welcome to the site.

 

[custom8726]

Intake, exhaust, egt/boost gauge, lift pump, EFI live.
You will easily have 500 to the wheels with that.
I'd also do it in that order.

According to his sig he already has a lift pump, intake, exhaust.. X2 on EFI though and welcome to the site.....

 

[HoleMaker]

Awesome, thanx y'all! I'm guessing this duramaximizer was a waste? Don't seem to get much out of it. Where can I get efi from? You can change tunes on the fly with efi right? Also can you twin with the stock turbo and gain hp?


---
I am here: http://maps.google.com/maps?ll=51.115617,-114.050047

 

[bullfrogjohnson]

Welcome to the site! Dont know if its close but look up Teddy @ MPL motorsports.

http://www.duramaxdiesels.com/forum/forumdisplay.php?f=75

 

[HoleMaker]

Killer, thanx man! I never knew of any efi dealers up here. I will have to contact him


---
I am here: http://maps.google.com/maps?ll=51.115588,-114.050189

 

[bullfrogjohnson]

Killer, thanx man! I never knew of any efi dealers up here. I will have to contact him


---
I am here: http://maps.google.com/maps?ll=51.115588,-114.050189

If you cant get up with Ted, get up with Simon (sweetdiesel)

 

[PAT]

According to his sig he already has a lift pump, intake, exhaust.. X2 on EFI though and welcome to the site.....

Oops... I'm on tapatalk and can't see his sig. Sorry.

Welcome though!

 

[blk smoke lb7]

Welcome to the site,Henry from creatures sells the efi live turbos and the works :thumb:

 

[HoleMaker]

Thanx again, I heard People were getting 600hp on stock motor? Is that With injectors and Pump or just turbo and tune?




---
I am here: http://maps.google.com/maps?ll=51.115658,-114.050173

 

[Houser04lly]

I would love to get 600 on a top end

 

[TheBac]

Welcome to the site. There's quite a few Albertans here...and it seems they all love big hp and fast times. :rofl: You'll have lots of help in your quest. thats for sure.

Thanx again, I heard People were getting 600hp on stock motor? Is that With injectors and Pump or just turbo and tune?

Been almost there....and bent all the rods in the motor. IMO, I wouldnt recommend trying it on LB7/LLY rods.

 

[blk smoke lb7]

I believe jmaz268 is getting 578 and running out of fuel stock motor stock cp3 with 45% overs a htt 366 and the motor has 180k or 190 by now

 

[Houser04lly]

Those numbers look real good ... If I were getting those numbers I would just go ahead and throw some studs on just to be safe .. shouldnt be to bad just till the motor forward a little bit to get the ones in the back.. mod the CP3 ur looking at a fast truck

 

[Sledhead]

Also can you twin with the stock turbo and gain hp?

Yes you can :thumb:

Welcome to the site. I lived in the N.E. for a couple of years, miss AB.

 

[HoleMaker]

Thanx y'all, great info and help. I'm happy to be here driving a dmax I love the power just want more lol so I think I'll look into efi first then a turbo and see what i get. Is it cheaper or more worth while to twin the stock or just replace?




iPhoned

 

[Burn Down]

Simon is in Red Deer & Ted is just up the road in Lacombe. Both can help you with whatever you might think you want to try.

As far as twinning the stocker, it works very well & will give plenty of air to tear up the bottom end, if you get to aggressive with the fuel. I think Simon & I last conversation went like this, 100 over injectors, dual fuelers, turn fuel up until desired carnage level is met:thumb: I say EFI & twins or at least a 66mm charger.

And Welcome!