New Build

[S Phinney]

I have most if my parts in now just waiting on machine work to be finished up. Here's the new internally balanced crank.

 

[colorado.dmax]

Is that a brand new crank? What other parts are you going to be running?

 

[Awenta]

Pretty!

Sent from my SM-N910V using Tapatalk

 

[moparkxracer]

Looks really good!!

 

[S Phinney]

Is that a brand new crank? What other parts are you going to be running?

Yes it is a new LML crank. Pistons are Arias forged, 200 over injectors, Howards rods, fully ported GM heads and triples.

 

[Ne-max]

Yes it is a new LML crank. Pistons are Arias forged, 200 over injectors, Howards rods, fully ported GM heads and triples.

I think me, you and simmon are the only ones running Howards rods

 

[duramaxzak]

I think me, you and simmon are the only ones running Howards rods

I have Howards rods as well!:thumb:

Looks like a nice build!

 

[S Phinney]

I really like them. I got them when they were cheaper. They have gone up a few hundred dollars since I got those.

 

[MAXX IT OUT]

Who did your crank? How much difference weight between the stock and internal balanced?

 

[Burn Down]

That looks sweet. Whats the damage to get a crank internal balanced? (Ball Park)

 

[S Phinney]

So Cal did the crank for me. I'm not for sure how much weight difference but it should be around 6 lbs heavier, maybe more. There is 18 plugs of heavy metal.

 

[S Phinney]

The stock LML crank weighs in at 77.2 lbs. I will try tomorrow to weigh the internally balanced LML.

 

[S Phinney]

That looks sweet. Whats the damage to get a crank internal balanced? (Ball Park)

It usually cost around 2000 bucks.

 

[Burn Down]

It usually cost around 2000 bucks.

Ouch

 

[Evan@InglewoodTrans]

I have Howards rods as well!:thumb:

Looks like a nice build!

Me too

 

[S Phinney]

Who did your crank? How much difference weight between the stock and internal balanced?

Finally got around to weighing the internally balanced crank. It weighs 84 lbs even. The factory LML weigh 77.2 lbs.

 

[prostreeter600]

What CR are your Pistons ?

 

[DIESELMAFIAPER.LB7]

Why does it cost so much to internally balance it?

 

[delong_1]

Why does it cost so much to internally balance it?

Malory is expensive and if tungsten is being used its even more expensive plus the time to machine all the holes in the crank. Adds up fast

 

[Ne-max]

Just had my lb7 crank done. They took weight off?